What absorbs at 691 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 691 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 5 cited sources
Quick answer
A band near 691 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Alkene (C=C) | 1 | 1 | 1,0 |
| Imide | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 0,9 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Possible materials
| Material | Supporting peaks | Overlapping groups | Fuentes citadas |
|---|---|---|---|
| polydopamine | 691, 1543, 1707 | Methacrylate, Methoxy (OCH3) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 691 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura detrás de estas asignaciones
-
Metal oxygen confianza 1,0
“The intense band at 691.17 corresponds to 691.17 cm-1 corresponds to the Ce-O stretching vibrations [11];”
Synthesis of Lipase-Immobilized CeO2 Nanorods as Heterogeneous Nano-Biocatalyst for Optimized Biodiesel Production from Eruca sativa Seed Oil DOI: 10.3390/catal10020231 -
Imide confianza 1,0
“The disappearance of band at 691 The T values of the polymer are in the range of 199due to maleimide C=C bond confirms completion of the addig”
Sivasankari 等 - 2013 - Synthesis and Characterization of Thiophene Contai DOI: 10.14233/ajchem.2013.13514 -
confianza 0,9
“para-disubstituted aromatic ring”
Azubuike 等 - 2020 - Evaluation of super-disintegrant potential of acid DOI: 10.4314/tjpr.v19i3.1 -
Carboxyl (COOH) confianza 0,9
“Text: 'sharp peaks at 503, 606 and 691 are due to the carboxylic group.'”
Priya 和 Azhagan - 2023 - Influence of succinic acid species on structural, DOI: 10.15251/DJNB.2023.181.55 -
confianza 0,8
“Band above 691 cm-1 attributed to bending of BO units.”
Density of Bismuth Boro Zinc Glasses Using Machine Learning Techniques DOI: 10.1007/s10904-021-02183-y
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.