Was absorbiert bei 605 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 605 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 605 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 6 | 6 | 1,0 |
| Phosphate (PO4) | 3 | 2 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Silicon carbon | 2 | 2 | 1,0 |
| Phosphorus | 2 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| Silicon silicon | 1 | 1 | 1,0 |
| Boron nitrogen | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 605 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The peak at 605 cm-1 attributed to Cu(I)-O vibration of Cu 2O shits to 611 in the Cu 2O/ cellulose composite.”
Manuscript Preparation Instruction for Publishing in Computer Modeling in Engineering and Science (CMES) DOI: 10.3970/cmc.2018.03608 -
Vertrauen 1,0
“Mn stretching and bands observed at 605, C O bending vibrations.”
Mahmood 等 - 2006 - Comparative vapour phase FTIR spectra and vibratio DOI: 10.1016/j.saa.2005.11.024 -
Amide Vertrauen 1,0
“appearance of the SiC (cm 0.5 Cs 1206-cm(cid:3)1 peak Remark B C N O (605) coefficient 0.4 (cid:4) mc-Si7) Appeared p-type (cid:4) 0.3 Appeared n-type mc-Si (Fig.”
Second Harmonic Vibrational Mode of Substitutional Carbon in Cast-Grown Multicrystalline Silicon DOI: 10.1143/APEX.4.051401 -
Silicon silicon Vertrauen 1,0
“A measurement of the vibrational C local Methfessel22 predicted a negative shift in the Si-Si peak for (cid:3)605 cm-1 can be used to quantify the amount of mode at al.13 et SiGeC alloys using theoretical calculations.”
Wasyluk 等 - 2010 - Raman and Fourier transform infrared study of subs DOI: 10.1063/1.3284937(cid:5) -
Metal oxygen Vertrauen 1,0
“By analyzing particles formed by the self-decomposed ferrate and ferrate reacted with BPF with Fourier transform infrared spectroscopy (FTIR), it was found that the Fe-O peak red630cm-1 605cm-1, eOH to and stretch peak became broad and inte”
Ferrate oxidation of bisphenol F and removal of oxidation products with ferrate resulted particles DOI: 10.1016/j.cej.2019.123167 -
Vertrauen 1,0
“cm-1 C-N The vibrations at 1462 and 1290 are generated because of stretching C-Cl and bending vibrations, while the bond is responsible for the bands at 605 and cm-1 cm-1 (M-O) 633 [27].”
New Hybrid PVC/PVP Polymer Blend Modified with Er2O3 Nanoparticles for Optoelectronic Applications DOI: 10.3390/polym15030684 -
Phosphate (PO4) Vertrauen 1,0
“Phosphate bands could be identified at 605, 575 and 563 The FTIR bands obtained confirm that 3243-.”
Ion-Substituted Carbonated Hydroxyapatite Coatings for Model Stone Samples-8pt DOI: 10.3390/coatings9040231 -
Vertrauen 1,0
“In 2852 cm(cid:1)1 is observed which corresponds to metal nitrogen stretching CZTS sample a strong band at 605 (x¼0-1) Fig.”
CZTSxSe1−x nanocrystals_ Composition dependent method of preparation, morphological characterization and cyclic voltammetry data analysis DOI: 10.1016/j.solmat.2016.06.030
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.