Was absorbiert bei 520 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 520 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 520 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Silicon (Si) | 14 | 14 | 1,0 |
| Metal oxygen | 13 | 13 | 1,0 |
| Silicon-oxygen (Si-O) | 7 | 7 | 1,0 |
| Silicon silicon | 4 | 4 | 1,0 |
| Siloxane (Si-O-Si) | 3 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| N h | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Metal hydroxyl | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Metal oxo | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Silicon hydride | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 520 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Silicon (Si) Vertrauen 1,0
“In Raman spectrum, for amorphous phase and crystalline phase, the Si-Si TO phonon mode occurs at about 480 cm-1 and 520 cm-1, respectively.”
Chen 等 - 2014 - Effect of Deposition Power on the Structure Proper DOI: 10.4028/www.scientific.net/AMM.442.116 -
Silicon (Si) Vertrauen 1,0
“cm-1 measurement, a spectral calibration was made with the 520 silicon band as a reference.”
Guo 等 - 2010 - Micro-Raman and FTIR Spectroscopic Observation on DOI: 10.1021/jp9104147 -
Silicon hydride Vertrauen 1,0
“When S are 1% and 2%, the structure.[4] widely used to characterize the film The c cm-1 silicon films are highly crystallized, the Si-H stretchpeak at 520 can be attributed to the crystalline cm-1 cm-1 ing modes consist of not only typical”
Hou 等 - 2011 - Evolution of infrared spectra and optical emission DOI: 10.1088/1674-1056/20/7/077802 -
Amide Vertrauen 1,0
“Explicit assignment in text.”
Bioengineered silver nanoparticles using Elytraria acaulis (L.f.) Lindau leaf extract and its biological applications DOI: 10.1016/j.bcab.2020.101690 -
Silicon-oxygen (Si-O) Vertrauen 1,0
“cm-1 Peaks at wavenumbers of 423, 463, and 520 are associated with the O-Si-O bending of Peaks at wavenumbers of 423, 463, and 520 cm-1 are associated with the O-Si-O bending of”
Varrica 等 - 2019 - ATR-FTIR Spectral Analysis and Soluble Components DOI: 10.3390/ijerph16142507 -
Aromatic ring Vertrauen 1,0
“cm-1, signed to the transverse optic and transverse acoustic vibraarising from the and a D shoulder peak at around 1360 point.24 sp2 M tions at the breathing modes of atoms in clusters of sixfold aromatic rings.16,17 cm-1 The Raman bands of”
Wang 等 - 2007 - Elastic properties of a-C N H films DOI: 10.1063/1.2402477(cid:5) -
Silicon silicon Vertrauen 1,0
“This is because the intensity of the Si-C Raman peak for the satellite peak, and cm-1 can be compared with the intensity of the at 605 (cid:1)the cm-1 Si-Si mode is infrared forSi-Si peak near 520 (cid:3) (cid:1)3(cid:2) 229.3y, = 604.3+ Si”
Wasyluk 等 - 2010 - Raman and Fourier transform infrared study of subs DOI: 10.1063/1.3284937(cid:5) -
Metal oxygen Vertrauen 1,0
“Bending vibrations of V-O-V bonds Bi-O bonds in distorted [BiO 6] octahedral units Specific vibrations of Li-O bonds ~520 Bi-O vibrations in [BiO 6] octahedral units ~705”
Synthesis, thermal and spectroscopic characterization of lithium bismuth borate glasses containing mixed transition metal ions DOI: 10.13036/17533562.57.3.018
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.