Was absorbiert bei 1186 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1186 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1186 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| Methacrylate | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Oxygen heterocycle | 2 | 2 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Polypropylene | 1186, 1030, 1600 | Methacrylate, Acetate, Methoxy (OCH3) | 2 |
| graphene oxide | 1186, 1150, 3400 | Methacrylate, Acetate, C-O single bond | 1 |
| CS | 1186, 1645, 1720 | Methacrylate, C-O single bond, Acetate | 1 |
| CA | 1186, 1045, 1650 | Acetate, Methacrylate, C-O single bond | 1 |
| wood | 1186, 1740, 1730 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1186 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“δDAring) band of 1510 and the DA adduct (C-O-C, at an absorption band of 1186 In agreement with the spectroscopic characterization, the presence of a cross-linked network is also (G(cid:48)) (G(cid:48)(cid:48)) confirmed by rheology, namely”
Muljana 等 - 2022 - Cross-Linking of Polypropylene via the Diels-Alder DOI: 10.3390/polym14061176 -
Acetate Vertrauen 1,0
“As for the bands at 1242 and cm-1, 1186 they refer to the stretching of C-O-C bands of epoxy, but mostly in the phenolic groups cm-1 present in the ramie fiber constituents [41].”
Pereira 等 - 2020 - Ballistic Performance of Ramie Fabric Reinforcing DOI: 10.3390/polym12112711 -
Acetate Vertrauen 1,0
“Peak at 1186 and 1108 by Downloaded cm-1 cm-1 was of C-O stretching.”
Qureshi 等 - 2015 - Ethyl acetate Salix alba leaves extract-loaded chi DOI: 10.1080/09205063.2015.1100843 -
Hydroxyl (O-H) Vertrauen 1,0
“the In-O stretching vibration modes are usually observed in the region of 800-300 We T cm-1 can also recognize absorption band at 1186 related to In-O-H bending vibration [34].”
Yahia 等 - 2019 - Structural, optical, morphological and electrical DOI: 10.1016/j.surfin.2018.12.012 -
Alkene (C=C) Vertrauen 1,0
“In the FTIR spectrum of rGO-TEPA, few representative peaks were identified at 1654, In the FTIR spectrum of rGO-TEPA, few representative peaks were identified at 1654, 1561, 1443, and 1186 cm-1, which can be attributed to the C=C stretching”
Cojocaru 等 - 2022 - Electrospun Nanofibrous Membranes Based on Citric DOI: 10.3390/polym14020294 -
Lignin Vertrauen 1,0
“the inner finger-print average (1586-1186 To determine the ratio for the lignin peak, the average of the inner fingerprint range of To determine the ratio for the lignin peak, the average of the inner fingerprint range cm-1 cm-1 spectra fro”
Analysis of the Natural Aging of Silver Fir (Abies alba Mill.) Structural Timber Using Dendrochronological, Colorimetric, Microscopic and FTIR Techniques DOI: 10.3390/f14071363 -
C c single bond Vertrauen 1,0
“For samples treated with SMP and SMC in cm(cid:3)1 cm(cid:3)1 3(cid:3) curve (c), the peak at 1186.04 and 1037.21 (SO cm(cid:3)1 (C-C group) and 1610.80 stretching bond) suggest the”
Synthesis and characterization of comb-shaped copolymer as a filtration reducer and comparison with counterparts DOI: 10.1039/c7ra13255g -
C-O single bond Vertrauen 0,9
“Band at 1186 attributed to symmetric stretching of C-O-C group.”
de Faria 和 Martins-Franchetti - 2010 - Biodegradation of Polypropylene (PP), Poly(3-hydro DOI: 10.1590/S0104-14282010005000024
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.