Was absorbiert bei 1173 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1173 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1173 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 7 | 7 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| Methacrylate | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| C-O single bond | 3 | 2 | 1,0 |
| Ring structure | 3 | 2 | 1,0 |
| Aromatic ring | 3 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Fatty acid | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1173 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“The Raman spectrum of silk-PANI shows new absorption peaks at 1173 1231 1377 AC cm-1, cm-1 and 1510 compared to original silk and silk-RGO, corresponding to C-H bending of the quinoid ring, C-H C-N+ bending of the benzenoid ring, stretching”
Highly conductive and flexible silk fabric via electrostatic self assemble between reduced graphene oxide and polyaniline DOI: 10.1016/j.orgel.2017.12.016 -
Alkyl C-H Vertrauen 1,0
“that of symmetric bending at 1382 The absorption cm-1 bands at 1173 and 1155 are due to CH and CH 3 2 3.3.”
Katiyar 等 - 2017 - Fullerene (C-60) Containing Cross-Linked Polyacryl DOI: 10.1166/jnn.2017.12880 -
Vertrauen 1,0
“> the spectrum of BT0(873), broad peaks appeared in the K 1173 completely disappeared at temperatures Downloaded on EPR K Fig 5 shows the spectra of BTO measured at 77 in Published the presence of gaseous oxygen Two signals appearing at g=”
Kohno 等 - 1996 - Preparation of BaTi4O9 by a sol-gel method and its DOI: 10.1039/JM9960601921 -
Acetate Vertrauen 1,0
“The peaks at 1173 were due to C-O bonding, as shown in Figure 5A.”
An Amperometric Acetylcholine Biosensor Based on Co-Immobilization of Enzyme Nanoparticles onto Nanocomposite DOI: 10.3390/bios13030386 -
Aromatic ring Vertrauen 1,0
“dpa172d1_B DPA is characterized by bands with maxima at ~691-744 cm-1, 876 cm-1, 1173 cm-1, 1242 dpa173d1_B vibrational modes: the out-of-plane deformation of the benzene ring, deformation of the dpa174d1_B cm-1, 1317 cm-1, 1415 cm-1, 1456-”
The Photoluminescence and Vibrational Properties of Black Phosphorous Sheets Chemically/Electrochemically Functionalized in the Presence of Diphenylamine DOI: 10.3390/polym14214479 -
Alkyl C-H Vertrauen 1,0
“The band with a maximum at 1173 corresponds to CH 2 cm-1 twisting-and-rocking coupled vibrations.”
Optimization of Electrochemical Visualization of Latent Fingerprints with Poly(Neutral Red) on Brass Surfaces DOI: 10.3390/polym13193220 -
Carbohydrate Vertrauen 1,0
“The second LDA axis explained 31.3 % of the variation cm-1 and segregated the samples mainly according to the ATR-FTIR spectrum peak at 1737 cm-1 connected with lipids, peaks at 1173 and 1248 corresponded with carbohydrates and cm-1 the pea”
Highly Efficient Use of Infrared Spectroscopy (ATR-FTIR) to Identify Aphid Species DOI: 10.3390/biology11081232 -
Alkyl C-H Vertrauen 1,0
“1257, 1240 (C =O stretching), 1173 (C-H bending);”
Iliadi 等 - 2022 - Epsilon ffect of cleansers on the composition and DOI: 10.1186/s40510-022-00449-w
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.