Was absorbiert bei 995 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 995 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 995 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Hydroxyl (O-H) | 5 | 5 | 1,0 |
| Methoxy (OCH3) | 5 | 5 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| C-O single bond | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| Carbohydrate | 5 | 5 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| Phosphate (PO4) | 3 | 2 | 1,0 |
| Borate | 2 | 2 | 1,0 |
| Phosphorus | 2 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Phospholipid | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| N h | 1 | 0 | 1,0 |
| Ring structure | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| starch | 995, 1650, 1540 | Hydroxyl (O-H), Methacrylate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 995 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydrogen bond Vertrauen 1,0
“Polymers2022,14,1086 13of17 cm-1 of starch, respectively, and the band at 995 was related to the intramolecular hydrogen bonds of the hydroxyl group at C-6 [64].”
Dual Modification of Sago Starch via Heat Moisture Treatment and Octenyl Succinylation to Improve Starch Hydrophobicity DOI: 10.3390/polym14061086 -
Acetate Vertrauen 1,0
“1154 C-O stretching (of succinite) 995 ± 15 982 996 992”
Differentiation between copal and amber by their structure and thermal behaviour DOI: 10.1007/s10973-023-12333-8 -
Carbohydrate Vertrauen 1,0
“diffractominor new peak appeared at approximately = 13° in the cm-1 whereas the bands at 995 and 1047 were related to the amounts grams of GA-RS complexes, while gelatinized starch did not exhibit this of ordered regions (Lopez-Rubio, Flana”
Physicochemical interactions between rice starch and different polyphenols and structural characterization of their complexes DOI: 10.1016/j.lwt.2020.109227 -
Vertrauen 1,0
“The band appeared at 995 is min-1) nitrogen atmosphere (100 mL in the temperfor the S-O stretching vibrations, this S-O moiety was (cid:3)C ature range from 30 to 1200 at a heating rate of from the BMIM MeSO IL.”
Lakshmanamoorthy 和 Manivannan - 2022 - Ionic liquids assist synthesis of AgAgX (X = Cl, DOI: 10.1007/s10854-021-06774-w -
Silicon (Si) Vertrauen 1,0
“Bands at 905 and 995 cm-1 are assigned to Si-O-Ca stretching vibrations of C2S, and this phase gives J.Funct.”
The Application of 29Si NMR Spectroscopy to the Analysis of Calcium Silicate-Based Cement using Biodentine™ as an Example DOI: 10.3390/jfb10020025 -
Alkyl C-H Vertrauen 1,0
“cm)1, 1095 and 1199 while CH C shows four specific peaks at 995,”
Vodnar 等 - 2010 - Morphology, FTIR fingerprint and survivability of DOI: 10.1111/j.1365-2621.2010.02406.x -
Carbohydrate Vertrauen 1,0
“The same PC was also used to run Pike TemPRO spectrum of native starch shows peaks at 995 and 1022 software, which was used to control the heated ATR crystal and”
Warren 等 - 2013 - Infrared Spectroscopy with Heated Attenuated Total DOI: 10.1021/ac303552s -
Silanol (Si-OH) Vertrauen 1,0
“suggested that the Si-OH bands located at 995 cm-1 cm-1, and 697 correabsorption peaks at 601”
Yuan 等 - 2015 - Hydrophobic effect of silica functionalized with s DOI: 10.1007/s12039-015-0965-0
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.