What absorbs at 735 cm⁻¹ in an FTIR spectrum?
A band near 735 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 6 cited sources
Quick answer
A band near 735 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
可能的官能团归属
| 官能团 | 支持性事实 | 引用来源 | 最高置信度 |
|---|---|---|---|
| Metal oxygen | 2 | 2 | 1.0 |
| Methoxy (OCH3) | 1 | 1 | 1.0 |
| Methacrylate | 1 | 1 | 1.0 |
| C-O single bond | 1 | 1 | 1.0 |
| Acetate | 1 | 1 | 1.0 |
| Alkene (C=C) | 1 | 1 | 1.0 |
排名反映了累积的文献证据，而非单一的权威规则。请始终对照您的样品背景进行确认。
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 735 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
这些分配背后的文献
-
Alkene (C=C) 置信度 1.0
“acteristic of hydroperoxides progressively shifted to higher wavecm(cid:3)1 cm(cid:3)1), oxidativeproductssuchashydroperoxides,aldehydes,ketonesand number (from about 3443 to 3519 indicating increase cm(cid:3)1 carboxylic acids, and peak in”
Ogbu 和 Ajiwe - 2016 - FTIR studies of thermal stability of the oils and DOI: 10.1016/j.renene.2016.04.055 -
Metal oxygen 置信度 1.0
“The linear model can be expressed by: 2 rel.abs.735=(0.0494±0.0089)+ w/o.U 3O (0.0089±0.0002) × (1) 8 cm-1 cm-1 735 735 cm-1 cm-1 735 band 735 band band intensity band intensity U 3O w/o Replica U 3O w/o Replica 8 8 intensity relative to in”
Silva 等 - 2017 - DOI: 10.1590/0370-44672016700069 -
Acetate 置信度 1.0
“furan ring asymmetrical stretching (C-O-C) In the XRD curve of β-cyclodextrin, a strong peak cm-1 12.7o is due to The strong sharp peak that occurs at 735 as shown in Fig.”
Zhu 等 - 2021 - Formation and characterization of furfuryl mercapt DOI: 10.2478/pjct-2021-0035 -
置信度 0.9
“Peak area between 735 and 715 reflects amorphous linear paraffin fraction.”
Variable-temperature Fourier-transform infrared spectroscopy study of wax precipitation and melting in Canadian and Venezuelan asphalt binders DOI: 10.1016/j.conbuildmat.2020.120212 -
置信度 0.9
“Peak near 735 cm-1 attributed to SiC crystalline.”
Sha 等 - 2005 - The structure and photoluminescence properties of DOI: 10.1016/j.physleta.2005.07.048 -
Metal oxygen 置信度 0.9
“assigned to Al-O absorption”
Heteroployacid on the composite of boehmite and polyionic liquid as a catalyst for alcohol oxidation and tandem alcohol oxidation Knoevenagel condensation reactions DOI: 10.1038/s41598-022-20699-2
是否有此波段的光谱？
上传您的FTIR光谱，几秒钟内即可获得完整的解读报告——包含带文献引用的峰分配、库匹配和带有置信度评级的证据链。