What absorbs at 680 cm⁻¹ in an FTIR spectrum?
A band near 680 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Schnelle Antwort
A band near 680 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 5 | 5 | 1,0 |
| Silicon (Si) | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 2 | 1 | 1,0 |
| Methacrylate | 2 | 1 | 1,0 |
| C-O single bond | 2 | 1 | 1,0 |
| Acetate | 2 | 1 | 1,0 |
| Amide | 2 | 1 | 1,0 |
| Ring structure | 2 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Nitrate | 1 | 1 | 1,0 |
| Metalloid oxygen | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Silicon carbon | 1 | 1 | 0,9 |
| Carbonyl (C=O) | 1 | 1 | 0,7 |
| Amine primary | 1 | 1 | 0,7 |
| Hydrogen bond | 1 | 0 | 1,0 |
| Alkyl C-H | 1 | 0 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| ZnO | 680, 1400, 3430 | Metal oxygen, Hydroxyl (O-H) | 2 |
| gelatin | 680, 1652, 3300 | Hydroxyl (O-H) | 1 |
| ZnO NPs | 680, 1664, 875 | Hydroxyl (O-H), Metal oxygen | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 680 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Metal oxygen Vertrauen 1,0
“FTIR showed a new absorption at a wavelength of 680 and 1630 which is stretching vibration of symmetry and asymmetry of the Al-O-Al.”
conferenceseries.iop.org materials science and engineering open access proceedings IOP Conferences Series: Materials Science and Engineering DOI: 10.1088/1757-899X/176/1/012049 -
Ring structure Vertrauen 1,0
“The strong peaks at 1295, 1260, 1200, 1080, 1030 and The peak occurring at 680, is due to out of plane ring 1000cm-1”
Nagabalasubramanian 等 - 2009 - FTIR and FT Raman spectra, vibrational assignments DOI: 10.1016/j.saa.2009.02.044 -
Carbohydrate Vertrauen 1,0
“The cellulose-Ag-Cu nanohybrid cm-1 polymer based nanohybrid colorimetric sensor is thermally further shows characteristics bands at 680 and 620 for stable.”
Colorimetric Based Polysorbate Crosslinked Cellulose-Ag–Cu Nanohybrid Sensor for Urea Sensing Applications DOI: 10.1007/s10924-020-01703-0 -
Metalloid oxygen Vertrauen 1,0
“495 26.5 474 25.7 495 43.4 Bending vibrations of Te-O-Te or O-Te-O linkages 4] 620 17.7 621 33.5 625 18.5 Stretching vibrations [TeO 680 15.2 Stretching vibrations [TeO 4]”
Rada 等 - 2009 - Structural and electronic properties of tellurite DOI: 10.1007/s10853-009-3433-8 -
Vertrauen 1,0
“The low wave cm-1 number region exhibits a strong vibration around 680 which corresponds to antisymmetric Ti-”
Rajakani 和 Vedhi - 2013 - Synthesis and electrochemical studies of TiO2 - Pa DOI: 10.4028/www.scientific.net/AMR.678.263 -
Nitrate Vertrauen 1,0
“At the low (NOcm-1 peak at 680 is probably due to nitrate frequency region, the peaks at 180, 320, 370, 410 ) 3”
Sayari 等 - 2015 - Influence of aluminium concentration in Zn0.9V0.1O DOI: 10.1515/msp-2015-0013 -
Vertrauen 1,0
“The peak position cm-1) of Si-O bridging stretching of omphacite (at 680 is at a lower wavenumber than”
Origin of Blue-Water Jadeite Jades from Myanmar and Guatemala: Differentiation by Non-Destructive Spectroscopic Techniques DOI: 10.3390/cryst12101448 -
Vertrauen 1,0
“It can be assumed that surface defects, and 680 cm-1 attributed to the Zn-O bond (Figure 5a) [35].”
Babayevska 等 - 2021 - Fabrication of Gelatin-ZnO Nanofibers for Antibact DOI: 10.3390/ma14010103
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.