What absorbs at 633 cm⁻¹ in an FTIR spectrum?
A band near 633 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
クイックアンサー
A band near 633 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
可能性のある官能基アサイン
| 官能基 | 裏付け事実 | 引用元 | 最高信頼度 |
|---|---|---|---|
| Hydroxyl (O-H) | 3 | 3 | 1.0 |
| Chlorine | 2 | 2 | 1.0 |
| Phosphorus | 2 | 2 | 1.0 |
| Phosphate (PO4) | 2 | 2 | 1.0 |
| Metal oxygen | 2 | 2 | 1.0 |
| Secondary amine | 1 | 1 | 1.0 |
| C n single bond | 1 | 1 | 1.0 |
| Amide | 1 | 1 | 1.0 |
| Ring structure | 1 | 1 | 1.0 |
| C c single bond | 1 | 1 | 1.0 |
| Carboxyl (COOH) | 1 | 1 | 1.0 |
| S eq o | 1 | 1 | 1.0 |
| Alkyl C-H | 1 | 1 | 1.0 |
ランキングは蓄積された文献証拠を反映しており、単一の権威あるルールではありません。常にサンプルのコンテキストと照合して確認してください。
可能性のある材料
| 素材 | 補助ピーク | 重複グループ | 引用元 |
|---|---|---|---|
| kaolinite | 633, 3696, 693 | Hydroxyl (O-H), Phosphate (PO4) | 1 |
同じ文献プールがこのバンドと少なくとも1つの追加の特性ピークをサポートする場合にのみ、材料が表示されます。
スペクトルロジック
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 633 cm⁻¹ is usually not enough for material identification by itself.
実使用例
この種のクエリは、ポリマー識別、未知のプラスチックスクリーニング、QCトラブルシューティング、リサイクル材料の検証、および文献に基づいたピーク帰属のレビューで一般的です。
よくある間違い
- 少なくとも1～2つの支持ピークを確認せずに、1つの孤立したバンドを材料の証拠として扱うこと。
- 重複を無視: 複数の官能基が同じ波数付近に寄与することがあります。
- 添加剤、ブレンド、酸化、または汚染がスペクトルを歪める可能性がある場合に検証を省略すること。
検証アドバイス
曖昧さが残る場合は、特にブレンド、劣化サンプル、充填ポリマーについて、DSC、GC-MS、またはTGAで仮説を検証してください。
これらのアサインの根拠となる文献
-
信頼度 1.0
“The FTIR spectra results show (Figure 6) that the absorption peaks at 485, 519, and 633 cm-1 are attributed to the Al-O structural vibration and are characteristic peaks of Al2O3, consistent with the standard infrared peaks of corundum [15]”
Study on Gemological Characteristics of Blue Sapphires from Baw-Mar Mine, Mogok, Myanmar DOI: 10.3390/cryst11111275 -
信頼度 1.0
“C-N The vibrations at 1462 and 1290 cm-1 are generated because of stretching and C-Cl bond is responsible for the bands at 605 and 633 cm-1 bending vibrations, while the (M-O) Er2O3 has a metal-oxygen bond shown at 557 cm-1 [29].”
New Hybrid PVC/PVP Polymer Blend Modified with Er2O3 Nanoparticles for Optoelectronic Applications DOI: 10.3390/polym15030684 -
Phosphate (PO4) 信頼度 1.0
“Furthermore, the presence of the bands at 1093, 1033, 991, and 633 cm-1 is related to the phosphate”
Karami 等 - 2020 - Kinetics of Cross-Linking Reaction of Epoxy Resin DOI: 10.3390/polym12051157 -
Hydroxyl (O-H) 信頼度 1.0
“This was also supported by the presence of peaks at 633 which indicates the presence of OH groups hydrogen-bonded with SO 3H (Malins et al., 2016).”
Synthesis and characterization of sulfonated activated carbon as a catalyst for bio-jet fuel production from biomass and waste plastics DOI: 10.1016/j.enconman.2014.07.007 -
Alkyl C-H 信頼度 1.0
“Vibration of "additional" CH group corresponds to the band near 633 for A2 and S2 at 614 observed 2 CH2 group corresponds to the band near 633 cm-1 for A2 and S2 at 614 cm-1 observed also also in the FTIR spectra.”
Mikolaszek 等 - 2022 - Microscopic and Spectroscopic Imaging and Thermal DOI: 10.3390/polym14142888 -
信頼度 1.0
“cm-1 In the case of the sample JC-03 we find signals at 1175, 1129, 1088, and 987 corresponding to the symmetrical stretching vibration of S-O assigned to the presence of SO 4 cm-1 and at 633 and 608 to the bending vibration of SO 4.”
Nieto-Villena 等 - 2018 - Infrared Ellipsometry Analysis of Heritage Photogr DOI: 10.1080/00393630.2018.1476962 -
S eq o 信頼度 1.0
“capacity Moreover, there is an enlarged band with a slight change at 582 cm-1 in the composite 55 removal beads, indicating the sulfonic acid group, due to the combination of the bands at 633 and”
Potential Application of Innovative Aspergillus terreus/ Sodium Alginate Composite Beads as Eco-Friendly and Sustainable Adsorbents for Alizarin Red S Dye: Isotherms and Kinetics Models DOI: 10.3390/microorganisms11051135 -
Phosphate (PO4) 信頼度 1.0
“phosphate peaks at 633, 603 and 566 cm and decrease in 4 υ -1 For HAPS intensity.”
Wang 等 - 2012 - Formation and characterization of silica-coated HA DOI: 10.1515/secm-2011-0124
このバンドを持つスペクトルがありますか？
FTIRスペクトルをアップロードすると、数秒で完全な解釈レポート（文献引用付きピークアサイン、ライブラリマッチ、信頼度評価付き証拠チェーン）を取得できます。