What absorbs at 1801 cm⁻¹ in an FTIR spectrum?
A band near 1801 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 2 cited sources
Snabbt svar
A band near 1801 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Möjliga identifieringar av funktionella grupper
| Funktionell grupp | Stödjande fakta | Citerade källor | Högsta förtroende |
|---|---|---|---|
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Carbon dioxide | 1 | 1 | 1,0 |
Rankingen speglar ackumulerade litteraturbevis, inte en enda auktoritativ regel. Bekräfta alltid mot din provkontext.
Möjliga material
| Material | Stödjande toppar | Överlappande grupper | Citerade källor |
|---|---|---|---|
| polyethylene | 1801, 1737, 1720 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| polypropylene | 1801, 1030, 1600 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| PVA | 1801, 1660, 2930 | Acetate, Methacrylate, C-O single bond | 1 |
| CaO | 1801, 2909, 1839 | Methacrylate, C-O single bond, Acetate | 1 |
| MgO | 1801, 699, 874 | Methoxy (OCH3), Methacrylate, C-O single bond | 1 |
Material visas endast när samma litteraturpool stöder detta band och minst en ytterligare karakteristisk topp.
Spektrumlogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1801 cm⁻¹ is usually not enough for material identification by itself.
Användning i verkligheten
Denna typ av fråga är vanlig inom polymeridentifiering, screening av okänd plast, felsökning av kvalitetskontroll, verifiering av återvunnet material och litteraturstödd toppidentifieringsgranskning.
Vanliga misstag
- Behandla ett isolerat band som bevis på ett material utan att kontrollera minst en eller två stödjande toppar.
- Ignorerar överlapp: flera funktionella grupper kan bidra nära samma vågtal.
- Hoppa över validering när tillsatser, blandningar, oxidation eller föroreningar kan förvränga spektrat.
Verifieringsråd
När oklarhet kvarstår, validera hypotesen med DSC, GC-MS eller TGA, särskilt för blandningar, nedbrutna prover och fyllda polymerer.
Litteratur bakom dessa identifieringar
-
Carbon dioxide förtroende 1,0
“For these results, the signals at 870 cm-1 indicating the cm-1 presence of Ca-O bonds, the band at 1386 is the band relative to CaCO (formed 3 presence of Ca-O bonds, the band at 1386 cm-1 is the band relative to CaCO3 (formed cm-1 during t”
Direct Polypropylene and Polyethylene Liquefaction in CO2 and N2 Atmospheres Using MgO Light and CaO as Catalysts DOI: 10.3390/ma15030844 -
Acetate förtroende 1,0
“compares the FTIR spectra of the Eudragit E film at 30 and intensityof a new peak at due to the asymmetric stretching 1801C, Several characteristic IRabsorptionbands and their assignments at the mode of C-O-C also increased beyond strongly”
DSC-FTIR microspectroscopy used to investigate the heat-induced intramolecular cyclic anhydride formation between Eudragit E and PVA copolymer DOI: 10.1038/pj.2011.15;
Har du ett spektrum med detta band?
Ladda upp ditt FTIR-spektrum och få en fullständig tolkningsrapport – toppidentifieringar med litteraturhänvisningar, biblioteksmatchningar och en förtroendebedömd beviskedja – på sekunder.