Was absorbiert bei 1331 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1331 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1331 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Ring structure | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Boron nitrogen | 1 | 1 | 1,0 |
| S eq o | 1 | 1 | 0,9 |
| Phosphate (PO4) | 1 | 1 | 0,9 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1331 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Boron nitrogen Vertrauen 1,0
“of 745 and when the h-BN addition h-BN additive located at Furthercontent reaches 0.8wt% is interesting, which results more, the Raman peaks shift down to 1331.74 and 𝑠𝑝2 1331.16cm-1 from hybridization B-N-B and B-N vibration, rewhen the ad”
B–C Bond in Diamond Single Crystal Synthesized with h-BN Additive at High Pressure and High Temperature DOI: 10.1088/0256-307X/33/2/028101 -
Alkyl C-H Vertrauen 1,0
“It is understood that morphology is dependent cm(cid:1)1) -CH bending mode vibration (at 1331 indicates that largely on the synthesis method, choice of ingredients and 3”
Nasreen 等 - 2019 - Hybrid mesoporous silicates A distinct aspect to DOI: 10.1016/j.sjbs.2015.08.014 -
Water (H2O) Vertrauen 1,0
“11 of 19 These were also located in spectrum of ionic liquid [C8mim][NTf2] at 1347 cm-1 and 1330 cm-1, while the binding of one of the oxygen atoms of the sulfonic groups of the anion with a water molecule in complex (I) lead to a significa”
Study of Lithium-Extraction Systems Based on Benzo-15-Crown-5 Ether and Alkylimidazolium-BasedIonic Liquid DOI: 10.3390/molecules28030935 -
Ring structure Vertrauen 1,0
“91% Overall SR 82% cm-1 averages of the spectra that were reconstructed from the rethat is likely assigned possibly causing the band at 1331 maining four components show no characteristic paraffin sigto a ring deformation vibration [18, 49,”
Discrimination of grass pollen of different species by FTIR spectroscopy of individual pollen grains DOI: 10.1007/s00216-020-02628-2 -
Alkyl C-H Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Gu 等 - 2022 - Chemical Component Characterization and Potential DOI: 10.15376/biores.17.2.2525-2546 -
Acetate Vertrauen 1,0
“O-H (3800containing surface groups, namely the stretching (1385 modes, as well as the peak at 1331 attributed cm(cid:3)1 cm(cid:3)1) C-O 09 2800 to the one-phonon diamond mode which was found to appear and 3695 and single bond vibrations li”
Hydroxylation and self-assembly of colloidal hydrogenated nanodiamonds by aqueous oxygen radicals from atmospheric pressure plasma jet DOI: 10.1039/c8ra07873d -
Lignin Vertrauen 1,0
“The FTIR spectra of birch and abies ethanol lignin sulfates [16] obtained in a similar The FTIR spectra of birch and abies ethanol lignin sulfates [16] obtained in a similar way are almost identical, except for the presence in the spectrum”
An Efficient Method of Birch Ethanol Lignin Sulfation with a Sulfaic Acid-Urea Mixture DOI: 10.3390/molecules27196356 -
Hydroxyl (O-H) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Liu 等 - 2018 - Highly Efficient Flame Retardant Hybrid Composites DOI: 10.3390/polym10060625
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.