Silicate — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Silicate tendenziell absorbiert, zusammengestellt aus veröffentlichter Literatur und nach unterstützenden Belegen geordnet. Jede Zuordnung ist auf eine Quelle (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Silicate wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Silicate
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 800 | 4 | 4 | 1,0 |
| 1000 | 3 | 3 | 1,0 |
| 1400 | 3 | 3 | 1,0 |
| 1050 | 2 | 2 | 1,0 |
| 900 | 2 | 2 | 1,0 |
| 470 | 2 | 2 | 1,0 |
| 945 | 2 | 2 | 1,0 |
| 437 | 1 | 1 | 1,0 |
| 870 | 1 | 1 | 1,0 |
| 990 | 1 | 1 | 1,0 |
| 950 | 1 | 1 | 1,0 |
| 1029 | 1 | 1 | 1,0 |
| 3325 | 1 | 1 | 1,0 |
| 1646 | 1 | 1 | 1,0 |
| 1100 | 1 | 1 | 1,0 |
| 462 | 1 | 1 | 1,0 |
| 710 | 1 | 1 | 1,0 |
| 3450 | 1 | 1 | 1,0 |
| 795 | 1 | 1 | 1,0 |
| 1776 | 1 | 1 | 1,0 |
| 680 | 1 | 1 | 1,0 |
| 1040 | 1 | 1 | 1,0 |
| 445 | 1 | 1 | 1,0 |
| 960 | 1 | 1 | 1,0 |
| 3620 | 1 | 1 | 1,0 |
| 1630 | 1 | 1 | 1,0 |
| 2924 | 1 | 1 | 1,0 |
| 1110 | 1 | 1 | 1,0 |
| 1423 | 1 | 1 | 1,0 |
| 463 | 1 | 1 | 1,0 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 82 für Silicate an.
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
1429 cm⁻¹ Vertrauen 1,0
“The sodium silicate μL and 100 DMSO per well was added to dissolve the shows the absorption bands around 1429, 970, 864 and cm-1”
Fabrication of Biogenic Silica Nanostructures from Sorghum bicolor Leaves for Food Industry Applications DOI: 10.1007/s12633-020-00379-4 -
3500 cm⁻¹ Vertrauen 1,0
“The silane-modified NaeMt 29Si pattern of NMR spectrum of in DMF cm-1 eOH band after 3500 is associated with metal groups in silicate medium is presented in Fig.”
Silane functionalization of sodium montmorillonite nanoclay_ The effect of dispersing media on intercalation and chemical grafting DOI: 10.1016/j.clay.2017.12.020 -
1400 cm⁻¹ Vertrauen 1,0
“1400cm-1 due to silicate, tetrahedral and triangular borate Table 2 depicts the corrosion weight loss data of the three 1700 groups, respectively.”
Corrosion Behavior Mechanism of Borosilicate Glasses Towards Different Leaching Solutions Evaluated by the Grain Method and FTIR Spectral Analysis Before and After Gamma Irradiation DOI: 10.1007/s12633-017-9586-1 -
470 cm⁻¹ Vertrauen 1,0
“The second silicate bands are 4 cm-1 in C-S-H broadly characterized as O-Si-O deformation or bending modes, which occur near 451 470cm-1 cm-1 667cm-1 and in C-A-S-H and the band 663 or is due to Si-O-Si bending vibrations.”
He 等 - 2011 - Morphology and Structure of Aluminum Substituted C DOI: 10.4028/www.scientific.net/AMR.287-290.1193 -
1034 cm⁻¹ Vertrauen 1,0
“cm-1 appeared at 1509 A weak peak at 1034 showed asymmetric stretching of C-OC and Si-O stretching vibration, indicating the presence of silicates.”
Structural, Physical, and Mechanical Analysis of ZnO and TiO2 Nanoparticle-Reinforced Self-Adhesive Coating Restorative Material DOI: 10.3390/ma14247507 -
975 cm⁻¹ Vertrauen 1,0
“Intense, shoulder Intense Si-O 1000 SiO2 stretching lattice n/a Intense, shoulder Intense Si-O 975 SiO2 silicate stretching (kaolinite, illite) [86] n/a Intense, shoulder Intense”
FTIR photoacoustic spectroscopy for identification and assessment of soil components_ Chernozems and their size fractions DOI: 10.1016/j.pacs.2020.100162 -
800 cm⁻¹ Vertrauen 1,0
“K FTIR spectra of these solutions show great variaFigure 3 FTIR spectra of silica sol, potassium silicate solution and tions in band shape and band location between 800 and the corresponding potassium silicate glass.”
Osswald 和 Fehr - 2006 - FTIR spectroscopic study on liquid silica solution DOI: 10.1007/s10853-006-7327-8 -
969 cm⁻¹ Vertrauen 1,0
“The absorption band at 953 and is designated to the stretching 857cm-1 frequency of Sr-O bond and Si-O stretching frequency appears at in the prepared silicate materials is due to the asymmetric 969cm-1 stretching frequency of Si-O bond in”
Down-conversion characteristics of Eu3+ doped M2Y2Si2O9 (M = Ba, Ca, Mg and Sr) nanomaterials for innovative solar panels DOI: 10.1016/j.pnsc.2019.07.003
Sehen Sie Silicate in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.