Was absorbiert bei 602 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 602 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 602 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Phosphate (PO4) | 9 | 9 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Bromine | 1 | 1 | 1,0 |
| Carbon bromine | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Fe3O4 | 602, 2358, 1673 | Metal oxygen, Alkyl C-H | 1 |
| hydroxyapatite | 602, 1620, 1639 | Phosphate (PO4), Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 602 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The peak cm-1 at 602 can be attributed to terminal oxygen vibration cm-1 of Sn-OH, while the peak appearing at 688 is due to (F1).”
Synthesis, structural and optical properties of Fe-doped nanocrystalline SnO2 DOI: 10.1007/s10854-017-7018-z -
Metal oxygen Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Hassanien 等 - 2019 - Novel green route to synthesize cadmium oxide@grap DOI: 10.1088/2053-1591/ab23ac -
Vertrauen 1,0
“to lower frequency of 1610 is 1633 [995]/Peak Area [602], decreased in the order of low Area caused by the partial attraction of electron density in to high concentration of silica functionalized with Ti4+ C=N ion.”
Yuan 等 - 2015 - Hydrophobic effect of silica functionalized with s DOI: 10.1007/s12039-015-0965-0 -
Vertrauen 1,0
“cm-1 In the FTIR spectrum of Fe 3O 4, it is possible to verify a band of vibration at 602 typical of bonding cm-1 cm-1 Fe-O.”
Bruckmann 等 - 2022 - Synthesis, Characterization, and Biological Activi DOI: 10.21203/rs.3.rs-1025029/v1 -
Alkyl C-H Vertrauen 1,0
“The in-plane bending band of C-H in the aromatic hydrocarbon is detectable at 1321 cm-1, and out-of-plane bending bands are at 818 and 602 cm-1.”
Synthesis of Bioactive Chlorogenic Acid-Silica Hybrid Materials via the Sol–Gel Route and Evaluation of Their Biocompatibility DOI: 10.3390/ma10070840 -
Phosphate (PO4) Vertrauen 1,0
“Moreover, the bands that could be found at 564 and 602 cm-1 were due to the υ4 (triply degenerate) molecular vibration of the O-P-O bond and their presence in the FTIR spectra indicate that the hydroxyapatite is well structured [23,24,26,47”
Physicochemical Characterization of Europium-Doped Hydroxyapatite Thin Films with Antifungal Activity DOI: 10.3390/coatings12030306 -
Vertrauen 1,0
“melting point of this compound is between 94 and 75∘ C-O Axial deformation 1134 C, Compared to the melting point of 2,5-dimethylphenol, it appears that the increase in temperature recorded is C-I Vibration 602 consistent,giventhattheadditio”
Fontana 等 - 2015 - Synthesis and Characterization of PPV Monomer for DOI: 10.1155/2015/620938 -
Phosphate (PO4) Vertrauen 1,0
“Vibrations at 582 593 and 606 are attributed to PO cm-1, the υ4 (PO43-) at 570 and 602 cm-1, υ1 (PO43-) at 962 cm-1, and υ3 (PO43-) at 1051 and 4 vibrations (asymmetric O-P-O bending mode) [46,49-51].”
Gavinho 等 - 2023 - An Eco-Friendly Process to Extract Hydroxyapatite DOI: 10.3390/jfb14050279
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.