Was absorbiert bei 525 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 525 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 525 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 5 | 5 | 1,0 |
| Silicon-oxygen (Si-O) | 5 | 5 | 1,0 |
| Silicon (Si) | 3 | 3 | 1,0 |
| Siloxane (Si-O-Si) | 2 | 2 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 0 | 1,0 |
| Phosphorus | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| montmorillonite | 525, 1637, 523 | Silicon-oxygen (Si-O), Silicon (Si) | 2 |
| CuO | 525, 453, 1000 | Metal oxygen | 1 |
| bentonite | 525, 882, 918 | Silicon-oxygen (Si-O), Silicon (Si), Siloxane (Si-O-Si) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 525 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Metal oxygen Vertrauen 1,0
“BiO octahedral structure possesses 6 M cm-1 peaks at 525 and 450 due to the bending vibration of Bi-O.”
Francis 等 - 2016 - Optical nonlinearity in multiferroic bismuth ferri DOI: 10.1016/j.jallcom.2016.07.094 -
Metal oxygen Vertrauen 1,0
“Wave number cm-1 The peak at 525 should be a stretching of Cu-O, which”
Padil 和 Cernik - 2013 - Green synthesis of copper oxide nanoparticles usin DOI: 10.2147/IJN.S40599 -
Vertrauen 1,0
“One possible explanation for the appearance of the band at 525 cm-l could be due to the incorporation of Al atoms into the CON building units, leading to”
Park 等 - 2020 - Insight into the crystallization mechanism of the DOI: 10.1016/j.micromeso.2020.110213 -
Carboxyl (COOH) Vertrauen 1,0
“All three samples show a desorption peak with maximum at around 525 K, as in the case of the AlPO sample, that would correspond to weak acid sites, and an additional desorption peak at higher temperature (with maximum at around 625 K), whic”
Alvaro-Munoz 等 - 2013 - Effect of silicon content on the catalytic behavio DOI: 10.1016/j.cattod.2013.04.031 -
Metal oxygen Vertrauen 1,0
“cm-1 band indicates the presence of quartz, the 625 band stems from out-of-plane Al-O-Si cm-1 cm-1 vibrations, and the bands at 525 and 467 are related to Al oct-O-Si, and Si-O-Si bending vibrations, respectively.”
Rehydration Driven Na-Activation of Bentonite—Evolution of the Clay Structure and Composition DOI: 10.3390/ma14247622 -
Vertrauen 1,0
“The main reduction peak at 490 K may be related to the direct reduction of extra-framework octahedral (Cu(II) whereas the reduction peak at 525 K may be related to the reduction of copper oxides occurring in zeolite pores in line with earli”
High activity of mononuclear copper present in the framework of CuSiBEA zeolites in the selective catalytic reduction of NO with NH3 DOI: 10.1016/j.micromeso.2015.11.065 -
Vertrauen 1,0
“cm-1 A strong complex band at 1037 is attributed to the stretching vibration of the Si-O groups cm-1 cm-1 of the tetrahedral sheets and the absorption bands at 525 and 467 belong to Si-O-Al cm-1,”
Du 等 - 2020 - Synthesis, Property and Mechanism Analysis of a No DOI: 10.3390/min10020128 -
Vertrauen 1,0
“The weak for the loss of the physically adsorbed water and the second 525cm-1 153.9∘ band at is bending vibration of Si-O-Al and the C corresponding to the endothermic valley appears at 834cm-1”
Li 等 - 2014 - Preparation and Characterization of Montmorillonit DOI: 10.1155/2014/167402
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.