What absorbs at 3266 cm⁻¹ in an FTIR spectrum?
A band near 3266 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Quick answer
A band near 3266 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Anhydride | 1 | 1 | 1,0 |
| N h | 1 | 1 | 0,8 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 3266 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatur hinter diesen Zuweisungen
-
Anhydride Vertrauen 1,0
“1858 new peak at 3266 cm-land two new anhydride peaks at and 1786 cm-l.”
Ha 等 - 2001 - Spectroscopic stuides on the liquid crystal alignm DOI: 10.1080/10587250108028259 -
Carbohydrate Vertrauen 1,0
“Peaks very complex structure, which is related to the multiplicity cm-1 (a) at 3266 are characteristic for stretching vibraof skeletal vibrations of glucose pyranose rings [29].”
Studies on the Combined Impact of Starch Source and Multiple Processing on Selected Properties of Thermoplastic Starch/Ethylene-Vinyl Acetate Blends DOI: 10.1007/s10924-019-01406-1 -
Hydroxyl (O-H) Vertrauen 1,0
“FTIR Spectral Analysis The native chitosan (Figure 2a) shows distinctive peaks at 3846 and 3266 cm-1 of -OH and -NH₂ stretching, respectively.”
Fe(III)–Chitosan Microbeads for Adsorptive Removal of Cr(VI) and Phosphate Ions DOI: 10.3390/min12070874
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.