What absorbs at 3011 cm⁻¹ in an FTIR spectrum?
A band near 3011 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 6 cited sources
Quick answer
A band near 3011 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Penetapan kumpulan berfungsi yang mungkin
| Kumpulan berfungsi | Fakta sokongan | Sumber dipetik | Keyakinan tertinggi |
|---|---|---|---|
| Fatty acid | 2 | 2 | 1.0 |
| Alkyl C-H | 1 | 1 | 1.0 |
| Aromatic ring | 1 | 1 | 1.0 |
| Ester | 1 | 1 | 1.0 |
| Alkene (C=C) | 1 | 1 | 0.9 |
Pemeringkatan mencerminkan bukti literatur terkumpul, bukan satu peraturan berwibawa. Sentiasa sahkan terhadap konteks sampel anda.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 3011 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatur di sebalik penetapan ini
-
Fatty acid keyakinan 1.0
“Peaks observed at about 3010 (¼¼CAH) were attributed to the olefinic stretching unsaturation.3,8,25,26 vibration arising from fatty acid FTIR measurements ¼¼CAH Cis bond absorption was observed at 3010.57”
Structure characterization of films from drying oils cured under infrared light DOI: 10.1002/app.31260 -
keyakinan 1.0
“Explicit assignment in table.”
Cakmak-Arslan 等 - 2020 - Investigation of the Toxic Effects of Rhododendron DOI: 10.9775/kvfd.2019.22996 -
Ester keyakinan 1.0
“The spectrum cm-1 vibrations, respectively), and 1745 (C=O vibrations of lipid esters) that are indicative also revealed a smaller peak at 3011 cm-1 (olefinic group = CH), which is typical for unof lipids, FAs or triglycerides and therefore”
Crypthecodinium cohnii Growth and Omega Fatty Acid Production in Mediums Supplemented with Extract from Recycled Biomass DOI: 10.3390/md20010068 -
Aromatic ring keyakinan 1.0
“LLM confirmed rule peak-group candidate”
Spray-Drying of Hydroxypropyl -Cyclodextrin Microcapsules for Co-Encapsulation of Resveratrol and Piperine with Enhanced Solubility DOI: 10.3390/cryst12050596 -
keyakinan 0.9
“Text: 'The band at 3011 which is assigned to the CAC absorption of bonds'”
Mechanical properties of linseed oil monoglyceride maleate/styrene copolymers DOI: 10.1002/app.21790 -
keyakinan 0.8
“Listed as one of four stretching peaks.”
Ohshita 等 - 2014 - N-H related defects in GaAsN grown through chemica DOI: 10.7567/JJAP.53.031001
Ada spektrum dengan jalur ini?
Muat naik spektrum FTIR anda dan dapatkan laporan tafsiran penuh — penetapan puncak dengan petikan literatur, padanan perpustakaan, dan rantaian bukti berkadar keyakinan — dalam beberapa saat.