What absorbs at 2832 cm⁻¹ in an FTIR spectrum?
A band near 2832 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 6 cited sources
Quick answer
A band near 2832 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Возможные назначения функциональных групп
| Функциональная группа | Подтверждающие факты | Цитируемые источники | Максимальная достоверность |
|---|---|---|---|
| Amino acid | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 0 | 0,9 |
Ранжирование отражает накопленные литературные данные, а не единственное авторитетное правило. Всегда проверяйте в контексте вашего образца.
Possible materials
| Материал | Поддерживающие пики | Overlapping groups | Цитируемые источники |
|---|---|---|---|
| silver nanoparticles (AgNPs) | 2832, 1100, 1749 | N h | 1 |
| diamond | 2832, 1378, 1332 | Secondary amine, Aromatic ring | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2832 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Литература, лежащая в основе этих назначений
-
Alkyl C-H достоверность 1,0
“2 cm(cid:1)1 the curve under the CH stretch region was plotted as a of 2832 band increased for diamond sheets that were function of H concentration for the standard sample.”
Titus 等 - 2005 - Quantitative analysis of hydrogen in chemical vapo DOI: 10.1016/j.diamond.2004.12.001 -
Amide достоверность 1,0
“The calculated 2820 N-CH 3 frequencies (Table 2) are not only from pure C-N stretching 2832 O-CH 3 SP3CH 2850 Sym.”
Titus 等 - 2006 - Nitrogen and hydrogen related infrared absorption DOI: 10.1016/j.tsf.2005.12.062 -
Aromatic ring достоверность 1,0
“observed at 2832.5 The fourth peak is a bond valence vibration C=C aromatic ring”
Belo 等 - 2018 - Development of a Black Liquor Electrolyzer for Lig DOI: 10.1149/08604.0003ecst -
достоверность 1,0
“cm-1 The wavenumber at 2976 can be associated to N-H and C-H stretching, 2860 to the C-H asymmetNH+ cm-1 ric stretching vibration, and 2832 to N-H symmetric stretching ( ) also present in free amino acids.”
ATR-FTIR spectroscopy of plasma supported by multivariate analysis discriminates multiple sclerosis disease DOI: 10.1038/s41598-023-29617-6 -
достоверность 0,9
“Explicit assignment in text.”
Bawazeer 等 - 2021 - Green synthesis of silver nanoparticles using Trop DOI: 10.1515/gps-2021-0003 -
достоверность 0,9
“Explicit assignment in text.”
Bawazeer 等 - 2021 - Synthesis, Characterization and Bioactivity Profil DOI: 10.22207/JPAM.15.2.11
Есть спектр с этой полосой?
Загрузите свой FTIR-спектр и получите полный отчет об интерпретации — назначение пиков с цитированием литературы, совпадения с библиотекой и цепочку доказательств с оценкой достоверности — за секунды.