Was absorbiert bei 1524 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1524 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1524 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Amide | 5 | 5 | 1,0 |
| N h | 4 | 4 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Nitrogen heterocycle | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Protein beta sheet | 1 | 1 | 0,8 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| graphite | 1524, 1640, 1326 | Alkyl C-H, N h | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1524 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Metal oxygen Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Nickel adsorption from aqueous solution using lemon peel biomass chemically modified with TiO2 nanoparticles DOI: 10.1016/j.scp.2020.100299 -
Alkyl C-H Vertrauen 1,0
“Vials were subat 1524.26 cm-1, 1308.30 cm-1, and at 839.48 cm-1 was jected to mechanical shaking at 400 rpm for 24 h observed due to C-H stretching, C-C stretching and”
Batool 等 - 2019 - USE OF GLUTARIC ACID TO IMPROVE THE SOLUBILITY AND DOI: 10.32383/appdr/94246 -
Vertrauen 1,0
“Explicitly assigned as G-peak in text.”
Simultaneous Gene Delivery and Tracking through Preparation of Photo-Luminescent Nanoparticles Based on Graphene Quantum Dots and Chimeric Peptides DOI: 10.1038/s41598-017-09890-y -
Amide Vertrauen 1,0
“Assessment of the residual lipids in the biomass namely chitin and chitosan (N-H stretching at 3275 cm-1, after the transesterification and 3095 C =O stretching in amides at 1660 and cm-1 cm-1 1625 Assessment of the residual lipids in the f”
Evaluation and optimisation of direct transesterification methods for the assessment of lipid accumulation in oleaginous filamentous fungi DOI: 10.1186/s12934-021-01542-1 -
Amide Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Purification and Structural Characterization of the Central Hydrophobic Domain of Oleosin* DOI: 10.1074/jbc.M202721200 -
Secondary amine Vertrauen 1,0
“After the reduction of AgNO3, the shift of the bands from 1538 cm-1 and 1524 cm-1 is attributed to the involvement of the secondary amines in the reduction process and the binding of the (NH) C=O group with nanoparticles.”
Part B: Improvement of the Optical Properties of Cellulose Nanocrystals Reinforced Thermoplastic Starch Bio-Composite Films by Ex Situ Incorporation of Green Silver Nanoparticles from Chaetomorpha linum DOI: 10.3390/polym15092148 -
Aromatic ring Vertrauen 1,0
“The FTIR spectrum of PPP/PEG-NH/Hys/MAB (Figure 3a) exhibited the typical absorption peaks at 2926 and 2869 cm-1 (-CH2-, asymmetric and symmetric stretching vibrations), 1713 cm-1 (C=O, stretching vibration), 1600 and 1524 cm-1 (aromatic C-”
Design and Synthesis of Amphiphilic Graft Polyphosphazene Micelles for Docetaxel Delivery DOI: 10.3390/pharmaceutics15051564 -
Vertrauen 1,0
“In the salt complexes, the carbonyl band appears at the 1629 and the amine band cm-1 at 1524 indicates that the salt has form interaction between the cation group and the nitrogen atom cm-1 complexed with amine group.”
Shaffie 和 Khiar - 2018 - Characterization of Chitosan-starch Blend Based Bi DOI: 10.1063/1.5041232
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.