Silanol (Si-OH) — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Silanol (Si-OH) tendenziell absorbiert. Sie wurden aus veröffentlichter Literatur zusammengestellt und nach der unterstützenden Evidenz geordnet. Jede Zuordnung ist bis zu einer Quelle (DOI) rückverfolgbar und wurde anhand unserer 320,000+ Referenzspektren und unseres Wissensgraphen kreuzvalidiert.
Gestützt durch 8 zitierte Quellen
Schnelle Antwort
Silanol (Si-OH) wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Silanol (Si-OH)
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 960 | 14 | 13 | 1,0 |
| 3740 | 12 | 10 | 1,0 |
| 3745 | 12 | 9 | 1,0 |
| 950 | 10 | 8 | 1,0 |
| 3500 | 8 | 7 | 1,0 |
| 3400 | 8 | 7 | 1,0 |
| 970 | 6 | 6 | 1,0 |
| 3450 | 6 | 5 | 1,0 |
| 3650 | 5 | 5 | 1,0 |
| 955 | 4 | 4 | 1,0 |
| 3747 | 4 | 3 | 1,0 |
| 3610 | 4 | 2 | 1,0 |
| 800 | 3 | 3 | 1,0 |
| 900 | 3 | 3 | 1,0 |
| 460 | 3 | 3 | 1,0 |
| 3744 | 3 | 3 | 1,0 |
| 956 | 3 | 3 | 1,0 |
| 555 | 3 | 3 | 1,0 |
| 3300 | 3 | 3 | 1,0 |
| 945 | 3 | 3 | 1,0 |
| 3700 | 3 | 3 | 1,0 |
| 943 | 3 | 3 | 1,0 |
| 1635 | 3 | 3 | 1,0 |
| 940 | 3 | 3 | 1,0 |
| 795 | 3 | 3 | 1,0 |
| 1100 | 3 | 2 | 1,0 |
| 965 | 3 | 2 | 1,0 |
| 3743 | 3 | 1 | 1,0 |
| 3750 | 3 | 1 | 1,0 |
| 3550 | 2 | 2 | 1,0 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 238 für Silanol (Si-OH) an.
Mögliche Materialien
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
1050 cm⁻¹ Vertrauen 1,0
“curve c - T In the insert, IR absorption spectra in the region of Si-OH stretching curve b - T d¼1050(cid:3)C,dopedwithdifferentamountofGd:curve1-1%m.f.Gdandcurve modefortwosamplesdensifiedatT Fraser 2 - 8% m.f.”
Vibrational spectroscopy of oh-defects in sol-gel Ce 3+ and Gd 3+ -doped silicate glasses DOI: 10.1080/10420150215814 -
4000 cm⁻¹ Vertrauen 1,0
“The FT-IR data was revealed the existence of peaks at 4000 400 showing the siloxane & silanol groups were present, Fluorescence Spectrophotometer, SEM and EDS.”
Banoth 等 - 2022 - Sustainable Thermochemical Extraction of Amorphous DOI: 10.21203/rs.3.rs-657645/v1 -
942 cm⁻¹ Vertrauen 1,0
“2 cm-1 were found at around 1078 ascribed to Si-O-Si (asymmetric stretching vibration) and cm-1 around 942 ascribed to silanol (Si-OH) groups (bending vibration).”
Study of Polyvinyl Alcohol-SiO2 Nanoparticles Polymeric Membrane in Wastewater Treatment Containing Zinc Ions DOI: 10.3390/polym13111875 -
1126 cm⁻¹ Vertrauen 1,0
“The subtracted spectrum revealed an increase in the shoulder bands at 1126 and cm(cid:2)1, cm(cid:2)1, 1040 in addition to the silanol band at 900-920 while a decrease in the intensity of methoxy bands could be observed”
Structural studies of alkoxysilyl-functionalised ionic liquid and its application in a hybrid electrochromic device DOI: 10.1016/j.materresbull.2012.08.036 -
900 cm⁻¹ Vertrauen 1,0
“The weak bands at 900 cm-1 and 949 cm-1 are possibly atattributed to the symmetric stretching vibrations Si-OH and Si-O-Si in amorphous silica.”
Corzo-Deluquez 等 - 2021 - Biosynthesized Silica Nanosuspension as Thermal Fl DOI: 10.3390/e23020142 -
3735 cm⁻¹ Vertrauen 1,0
“lated silanol peak at 3735 fresh Si-BEA and Ti-BEA samples All changes discussed above relate to silanol groups and do not displayed equivalent peak areas (less than 5% difference) while the necessarily prove any change in the actual Sn sit”
Courtney 等 - 2015 - Effect of water treatment on Sn-BEA zeolite Origi DOI: 10.1016/j.micromeso.2015.02.012 -
950 cm⁻¹ Vertrauen 1,0
“dense spherical silica powders were separated and settled down shows the presence of silanol (Si-OH) vibrations at 950 after about 600 s.”
Hydrolysis–condensation reactions of TEOS in the presence of acetic acid leading to the generation of glass-like silica microspheres in solution at room temperature DOI: 10.1039/B003221M -
795 cm⁻¹ Vertrauen 1,0
“The band at 447.49 is O-Si-O bending [11, 15, 16], at 794.67 cm-1 cm-1 is Si-OH stretching [11], and at 1087.85 is Si-O-Si stretching asymmetric [6, 15].”
Study of Structural and Magnetic Properties of Silica and Polyethylene Glycol (PEG-4000)-Encapsulated Magnesium Nickel Ferrite (Mg0.5Ni0.5Fe2O4) Nanoparticles DOI: 10.1088/1757-899X/202/1/012047
Sehen Sie Silanol (Si-OH) in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.
