Metal hydroxyl — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Metal hydroxyl tendenziell absorbiert, zusammengestellt aus veröffentlichter Literatur und nach unterstützenden Belegen geordnet. Jede Zuordnung ist auf eine Quelle (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Metal hydroxyl wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Metal hydroxyl
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 912 | 6 | 6 | 1,0 |
| 913 | 5 | 5 | 1,0 |
| 910 | 4 | 2 | 1,0 |
| 914 | 3 | 3 | 1,0 |
| 920 | 3 | 3 | 1,0 |
| 1100 | 3 | 2 | 1,0 |
| 3400 | 2 | 2 | 1,0 |
| 530 | 2 | 2 | 1,0 |
| 3632 | 2 | 2 | 1,0 |
| 550 | 2 | 2 | 1,0 |
| 3770 | 2 | 2 | 1,0 |
| 3630 | 2 | 2 | 1,0 |
| 483 | 2 | 2 | 1,0 |
| 882 | 2 | 2 | 1,0 |
| 908 | 2 | 2 | 1,0 |
| 1641 | 2 | 2 | 1,0 |
| 907 | 2 | 2 | 1,0 |
| 3623 | 2 | 2 | 1,0 |
| 3378 | 2 | 2 | 0,9 |
| 3614 | 2 | 1 | 1,0 |
| 1154 | 2 | 1 | 1,0 |
| 782 | 2 | 1 | 1,0 |
| 2980 | 1 | 1 | 1,0 |
| 3420 | 1 | 1 | 1,0 |
| 1123 | 1 | 1 | 1,0 |
| 1126 | 1 | 1 | 1,0 |
| 2020 | 1 | 1 | 1,0 |
| 3617 | 1 | 1 | 1,0 |
| 1650 | 1 | 1 | 1,0 |
| 3642 | 1 | 1 | 1,0 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 143 für Metal hydroxyl an.
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
1300 cm⁻¹ Vertrauen 1,0
“Finally, absorption bands between 1300 and are assigned to the combination of stretch and bend vibrations of Si (or Al)-O framework and octahedral M-OH (M means metal element).”
Cai 等 - 2007 - A Fourier transform infrared spectroscopic study o DOI: 10.1016/j.saa.2006.02.053 -
3390 cm⁻¹ Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Dahham 等 - 2018 - Studies of ENR-25TiO2 Composites for Electronic M DOI: 10.1088/1742-6596/1019/1/012054 -
3455 cm⁻¹ Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Dahham 等 - 2018 - Synthesis and structural studies of an epoxidized DOI: 10.1016/j.polymertesting.2017.11.005 -
2272 cm⁻¹ Vertrauen 1,0
“3(OH)2972 As-O vibration Asymmetric stretch of As-O AsO 2272 Al-OH vibration OH stretching for basic hydroxyl groups from Al-OH Al(OH) Al(III) 3 2O 2388”
The effect of electrocoagulation (EC) on total arsenic, arsenite (As3+) and arsenate (As5+) species removal from model groundwater investigating toxicity and sludge characteristic DOI: 10.1007/s13201-022-01660-0 -
920 cm⁻¹ Vertrauen 1,0
“data.33-35 cm-1 The shoulder at 831 is due to the stretching cm-1 Al-O mode, whereas the band near 920 is tentatively Al-OH Alassigned as a mixed modes arising from stretch, O-Al Si-O-Si Si-O-Al vibration, and and stretching”
Fali 等 - 2021 - Nanoscale Spectroscopy of Dielectric Properties of DOI: 10.1021/acsphotonics.0c00951 -
912 cm⁻¹ Vertrauen 1,0
“Absorption bands cm-1 at 911.6, 912.5, 910.6, 912.2, 910.6 and 911.8 assigned to the Al-OH vibrations [40].”
Unique Halloysite Nanotubes–Polyvinyl Alcohol– Polyvinylpyrrolidone Composite Complemented with Physico–Chemical Characterization DOI: 10.3390/polym9060207 -
471 cm⁻¹ Vertrauen 1,0
“cm-1 1635 3433 and 3749 Ammoand 2018), then the wavenumber of 470.63 cm-1 denoted as the Al-Al-OH vibrations nium ions have inserted inside the layer of ben532.35 cm-1 due to has bet- (Zaher MS et al., 2018).”
Hakim 等 - 2023 - Ammonium-Assisted Intercalation of Java Bentonite DOI: 10.12911/22998993/156665 -
907 cm⁻¹ Vertrauen 1,0
“The peak at 907 observed only in HNT FTIR spectra is attributed to Al-OH bonding which does not appear in CTS (due to absence of Al) and also disappeared in CTS-Si/HNT nanocomposite due to the breaking of Al-OH bonding after when CTS-Si is”
Synthesis and Optimization of Superhydrophilic-Superoleophobic Chitosan–Silica/HNT Nanocomposite Coating for Oil–Water Separation Using Response Surface Methodology DOI: 10.3390/nano12203673
Sehen Sie Metal hydroxyl in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.