What absorbs at 967 cm⁻¹ in an FTIR spectrum?
A band near 967 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Quick answer
A band near 967 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Atribuiri posibile ale grupelor funcționale
| Grup funcțional | Fapte suport | Surse citate | Încredere maximă |
|---|---|---|---|
| Silicon (Si) | 4 | 4 | 1,0 |
| Alkene (C=C) | 4 | 3 | 1,0 |
| Silicon-oxygen (Si-O) | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| S eq o | 2 | 2 | 1,0 |
| Siloxane (Si-O-Si) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Nucleic acid | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Aldehyde (CHO) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Fatty acid | 1 | 0 | 1,0 |
Clasamentul reflectă dovezile acumulate din literatură, nu o singură regulă autoritară. Confirmați întotdeauna în contextul mostrei dvs.
Possible materials
| Material | Vârfuri suport | Overlapping groups | Surse citate |
|---|---|---|---|
| Chitosan-Based | 967, 2924, 1743 | Hydroxyl (O-H) | 1 |
| lipids | 967, 1735, 810 | Hydroxyl (O-H) | 1 |
| Chitosan | 967, 1650, 1655 | Hydroxyl (O-H) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 967 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura din spatele acestor atribuiri
-
Silicon (Si) încredere 1,0
“Materials Science in Semiconductor Processing 67 (2017) 46-54 967cm-1 seen at for the sample nitrided for 30min can be attributed to t = 30 min TO amorphous Si [37,39].”
Growth of silicon nitride by nitridation of amorphous silicon at low temperature in hot-wire CVD DOI: 10.1016/j.mssp.2017.05.015 -
Nucleic acid încredere 1,0
“950cm(cid:3)1 are dehydrated, the DNA bands at 967 and are absent a-helical b-sheet In addition, the positions of and bands are”
Rapid approach to analyze biochemical variation in rat organs by ATR FTIR spectroscopy DOI: 10.1016/j.saa.2013.09.131 -
Silicon (Si) încredere 1,0
“The absorption peak at 967 4 Figure 4 demonstrates the FTIR spectra of PFSS, CR, and CR-loaded PFSS at different associated with Si-O-Fe, proves the formation of a high polymeric substance of PFSS, dosage loadings and pH values.”
Degradation of Diazo Congo Red Dye by Using Synthesized Poly-Ferric-Silicate-Sulphate through Co-Polymerization Process DOI: 10.3390/polym15010237 -
Phosphate (PO4) încredere 1,0
“COH stretch 1467 1090 C-H bend PO2 stretch 1092 PO2 stretch 967 Choline stretch 1172”
Prediction of Neonatal Respiratory Distress Biomarker Concentration by Application of Machine Learning to Mid-Infrared Spectra DOI: 10.3390/s22051744 -
C c single bond încredere 1,0
“cm-1 (C-N in-plane deformation), 1201 (Py ring vibration), 1097 (asymmetric S(=O) 2 cm-1 stretching vibration), 1049 (symmetric S(=O) stretching and Py ring C-H deformation 2 cm-1 cm-1 vibration), 967 (C-C out of plane ring deformation vibr”
New conductive copolymer membranes via track-etched PC templates for biological media ultra-filtration DOI: 10.1016/j.nimb.2007.08.066 -
Alkene (C=C) încredere 1,0
“the increase in trans double bonds during cm-1 thermal oxidation can be observed by the increasing peak intensities at 967 [48].”
Chitosan-Based Anti-Oxidation Delivery Nano-Platform: Applications in the Encapsulation of DHA-Enriched Fish Oil DOI: 10.3390/md19080470 -
Nucleic acid încredere 1,0
“LLM confirmed rule peak-group candidate”
Di Giambattista 等 - 2010 - UVB radiation induced effects on cells studied by DOI: 10.1007/s00249-009-0446-9 -
încredere 1,0
“Additionally, the Si-O band of XLG at cm-1 967 [71] was found in all NC hydrogel spectra but modified because of the interaction with PNVP (Figure 4a,b).”
Poly(N-vinylpyrrolidone)–Laponite XLG Nanocomposite Hydrogels: Characterization, Properties and Comparison with Divinyl Monomer-Crosslinked Hydrogels DOI: 10.3390/polym14194216
Aveți un spectru cu această bandă?
Încărcați spectrul FTIR și obțineți un raport complet de interpretare — atribuiri de peak-uri cu citări din literatură, potriviri cu biblioteca și un lanț de dovezi cu nivel de încredere — în câteva secunde.