What absorbs at 791 cm⁻¹ in an FTIR spectrum?
A band near 791 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Quick answer
A band near 791 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Möjliga identifieringar av funktionella grupper
| Funktionell grupp | Stödjande fakta | Citerade källor | Högsta förtroende |
|---|---|---|---|
| Siloxane (Si-O-Si) | 3 | 3 | 1,0 |
| Silicon carbon | 3 | 3 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
Rankingen speglar ackumulerade litteraturbevis, inte en enda auktoritativ regel. Bekräfta alltid mot din provkontext.
Possible materials
| Material | Stödjande toppar | Overlapping groups | Citerade källor |
|---|---|---|---|
| SiC | 791, 805, 1136 | Silicon carbon, Silicon-oxygen (Si-O), Siloxane (Si-O-Si) | 2 |
| quartz | 791, 800, 3053 | Silicon-oxygen (Si-O), Siloxane (Si-O-Si) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 791 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Litteratur bakom dessa identifieringar
-
förtroende 1,0
“showed the characteristic vibration of SiC at 791 Peaks cm-1 Si-O-Si Opositioned at 473 and 1102 were assigned to and 2.4.”
In situ formation of β-silicon carbide nanorods from the hybrid of an organic moiety and methyltriethoxysilane DOI: 10.1016/j.matlet.2011.04.040 -
Alkyl C-H förtroende 1,0
“The absorption peak at 791 is characpyrimidine ring, and the stretching and swinging of the C H and cm-1 terized by the collective vibrations of four molecules in the lattice, H bonds.”
A comparative study on the experimental and calculated results of mid-infrared and Raman vibrational modes of nucleic acid bases DOI: 10.1016/j.jmgm.2017.04.016 -
Silicon carbon förtroende 1,0
“cmthe bending CH3 groups originating from Si-CH3 bond, Si-O-Si groups (1089-1015 weight - 60.10, vapor density - 2.1 (vs air), vapor pressure - 33 mmHg (20°C) and 44 (791cm-1) 1) and the stretch Si-C bonds from CH3 in the case of ZnO/PDMS p”
Sonmez 等 - 2018 - IDENTIFYING THE OPTIMUM METHOD FOR MODIFYING THE Z DOI: 10.1016/j.apcata.2012.03.037. -
Ring structure förtroende 1,0
“Borate ring deformation (662 1), cm-1), BO bending (791 stretching vibration of 3”
Vasumathy 等 - 2016 - Preparation and Characterization of the Structural DOI: 10.1590/1980-5373-MR-2016-0014 -
Silicon carbon förtroende 0,9
“Explicit assignment: characteristic vibration of SiC at 791 cm-1.”
Growth of silicon carbide nanorods from the hybrid of lignin and polysiloxane using sol-gel process and polymer blend technique DOI: 10.1016/j.matlet.2009.08.029 -
Siloxane (Si-O-Si) förtroende 0,9
“explicit assignment in text”
Evaluation of polyvinyl alcohol–borax/agarose (PVA–B/AG) blend hydrogels for removal of deteriorated consolidants from ancient Egyptian wall paintings DOI: 10.1186/s40494-019-0264-z -
förtroende 0,7
“out-of-plane polymers”
The effect of chain extender structure on the properties of new thermoplastic poly(carbonate–urethane)s derived from MDI DOI: 10.1007/s10973-016-5756-4
Har du ett spektrum med detta band?
Ladda upp ditt FTIR-spektrum och få en fullständig tolkningsrapport – toppidentifieringar med litteraturhänvisningar, biblioteksmatchningar och en förtroendebedömd beviskedja – på sekunder.