Was absorbiert bei 696 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 696 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 696 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 5 | 5 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| Styrene | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Metal halide | 1 | 1 | 0,9 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polystyrene | 696, 1020, 1600 | Aromatic ring, Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 696 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbohydrate Vertrauen 1,0
“798cm(cid:3)1, 780cm(cid:3)1 693cm(cid:3)1 and that were assigned for type 3 cm(cid:3)1 two nearly similar intensity peaks in M23/08 at 696 and a-polysaccharide band of [20].”
Choong 等 - 2014 - Identification of geographical origin of Lignosus DOI: 10.1016/j.molstruc.2014.04.001 -
C-O single bond Vertrauen 1,0
“The cm-1 band at 1504 is attributed to the phenyl nucleus stretching of BPEBPA and the absorption bands at 696 Methods ≡C-H cm-1 are attributed to the deforma(cid:2) and 1173 tion and the ether linkage present in the BPEBPA, The FTIR spectr”
Surender 等 - 2014 - Bismaleimide and Bispropargyl Ether Blends Curing DOI: 10.1134/S1560090414050157 -
Alkyl C-H Vertrauen 1,0
“The pronounced peak at 1446.41 is assigned to the can be observed at 754.61 and 695.93 cm-1, while the out-of-plane deformation of the phethe CH group bending vibration.”
Modeling and Simulation of Fabricated Graphene Nanoplates/Polystyrene Nanofibrous Membrane for DCMD DOI: 10.3390/polym13172987 -
Vertrauen 1,0
“(O corresponds to oxygen from the corner of the heteropolyanion structure), W-O e-W c IR spectrum of PDPA doped with the PTA heteropolyanions is characterized by the IR (O corresponds to oxygen from the side of the heteropolyanion structure”
The Photoluminescence and Vibrational Properties of Black Phosphorous Sheets Chemically/Electrochemically Functionalized in the Presence of Diphenylamine DOI: 10.3390/polym14214479 -
Fluorine (C-F) Vertrauen 1,0
“The presence of the fluoroalkyl groups was proved by cm-1 the bands at 1241 and 1206 that are attributed to the C-F stretching, and the weak cm-1 band at 696 ascribed to the CF2 scissoring [35].”
Bellido-Aguilar 等 - 2019 - Effect of a fluoroalkyl-functional curing agent on DOI: 10.1016/j.surfcoat.2019.02.006 -
Alkyl C-H Vertrauen 1,0
“structure;1:2:4substitutedphenylring Houttoplanedeviationalvibrations 834 C H 754 VibrationofaromaticC Sbond 696 C H 545 BendingofC S Ostretchingvibrations 1176;1109;1027 O”
Electrochimica Acta Sulfonated polyphenyl ether by electropolymerization DOI: 10.1016/j.electacta.2012.07.082 -
Aromatic ring Vertrauen 1,0
“Furthermore, the peak at 1720 originates from the carbonyl stretch, cm-1 whereas the peak around 696 results from the aromatic ring bending.”
Influence of Waste Toner on Asphalt Binder: Chemical and Rheological Characterization DOI: 10.3390/molecules28062794 -
Aromatic ring Vertrauen 1,0
“After modification with styrene, a new absorption peak Polymers2022,14,786 5of13 appeared at 696 cm-1 due to the phenyl group of styrene.”
Jambrekovic 等 - 2022 - Viscoelastic and Thermal Properties of Styrene Mod DOI: 10.3390/polym14040786
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.