Was absorbiert bei 475 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 475 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 475 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 7 | 7 | 1,0 |
| Silicon-oxygen (Si-O) | 3 | 3 | 1,0 |
| Siloxane (Si-O-Si) | 2 | 2 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 0,9 |
| Metalloid oxygen | 1 | 1 | 0,9 |
| S s | 1 | 1 | 0,7 |
| C-O single bond | 1 | 1 | 0,7 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| ZnO | 475, 1400, 3430 | Metal oxygen | 1 |
| SnO2 | 475, 2800, 1547 | Metal oxygen | 1 |
| Titanium Dioxide | 475, 1716, 1724 | Metal oxygen | 1 |
| Nanoparticles | 475, 1732, 1647 | Metal oxygen | 1 |
| CaO | 475, 2909, 1839 | Silicon-oxygen (Si-O) | 1 |
| glass | 475, 1100, 1075 | Silicon-oxygen (Si-O), Metal oxygen, Siloxane (Si-O-Si) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 475 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“cm-1 The FTIR spectrum of TiO nanoparticles is shown in Figure 2.The peak observed at 474.75 2 29 is corresponding to bending vibration (Ti-O-Ti) bonds in the TiO lattice.”
Latha 和 Lalithamba - 2018 - Synthesis and Characterization of Titanium Dioxide DOI: 10.1088/2053-1591/aab695 -
Vertrauen 1,0
“The other two peaks located at 475 and cm-1 772 are assigned to the Eg translational mode originated from the vibration of oxygen in the oxygen plane [35] and B mode which could be attributed to the expansion and 2g”
High Efficient and Cost Effective Titanium Doped Tin Dioxide Based Photocatalysts Synthesized via Co-precipitation Approach DOI: 10.3390/catal11070803 -
Vertrauen 1,0
“The Absorption results of the samples of Ca/P ration 1.0, 1.67 e 2.0, showed the cm-1 spectrums bands in the region of 475, 580, 1045 e 1100 43corresponding the PO groups vibration of stretching and 4000 3500 3000 2500 2000 1500 1000 500 (c”
Oliveira 等 - 2009 - Comparison of calcium CPP, HAp and TeCP phosphates DOI: 10.4028/www.scientific.net/KEM.396-398.557 -
Metal oxygen Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Photoluminescence and thermoluminescence studies of Tb3+ doped ZnO nanorods DOI: 10.1016/j.mseb.2013.01.006 -
Vertrauen 1,0
“The transmissions at 460 and 475 cm-1 were found to be produced by a symmetric bending vibration of Zn-O in the ZnO-R NPs and ZnO Std NPs, respectively”
Synthesis of Zinc Oxide Nanoparticles with Bioflavonoid Rutin: Characterisation, Antioxidant and Antimicrobial Activities and In Vivo Cytotoxic Effects on Artemia Nauplii DOI: 10.3390/antiox11101853 -
Vertrauen 1,0
“other hand is a feldspar whose characteristic peaks can cm-1 be observed between 475 and 515 (Si-O bond vibrations and Si-O-Si or Si-O-Al).”
Delgado Robles 等 - 2015 - Non-destructive in situ spectroscopic analysis of DOI: 10.1186/s40494-015-0048-z -
Vertrauen 1,0
“5, 474 geopolymer samples shown in the main absorbance band is in the region attributed 475 to an asymmetric stretching vibration of the Si-O-T group (T= Si or Al) which is in the”
Istuque 等 - 2019 - Effect of sewage sludge ash on mechanical and micr DOI: 10.1016/j.conbuildmat.2019.01.093 -
Borate Vertrauen 1,0
“The two small bands at 475 and 555 higherwavenumbers.Thepresenceofglassnetwork-forming attributed to the vibrations of some type of borate segments cations (P in the present case) in the glass promotes the forand to the bending vibrations o”
Saddeek 等 - 2016 - Fabrication and physical characteristics of new gl DOI: 10.1007/s12034-016-1334-4
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.