Was absorbiert bei 430 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 430 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 430 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 7 | 7 | 1,0 |
| Silicon (Si) | 3 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Nitrate | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Silicon silicon | 1 | 1 | 1,0 |
| Phosphorus | 1 | 0 | 1,0 |
| Phosphate (PO4) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| TiO2 | 430, 1700, 1093 | Metal oxygen, Hydroxyl (O-H) | 1 |
| quartz | 430, 800, 3053 | Silicon-oxygen (Si-O), Hydroxyl (O-H), Silicon (Si) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 430 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The frequency 2, cm-1 cm-1 (v 1) and 544-595 absorption bands in the ranges 430-442 (v 2, v 3) are assigned to the stretching vibration of the bonds between oxygen and metal ions in the octahedral and tetrahedral sites, respec-”
Impact of rare-earth ions on the physical properties of hexaferrites Ba0.5Sr0.5RE0.6Fe11.4O19, (RE = La, Yb, Sm, Gd, Er, Eu, and Dy) DOI: 10.1016/j.jallcom.2021.159812 -
Silicon (Si) Vertrauen 1,0
“(f) 3 and (g) 4 For comparison the 2 · · · cm-1 third band at 430 is related to local Si-Si vibrations spectrum of the Ge-bulk was included in (a).”
Mestanza 等 - 2007 - Fabrication and characterization of Ge nanocrystal DOI: 10.1007/s10853-007-1628-4 -
Ring structure Vertrauen 1,0
“1.217 0.951 C10 260cm-1 -1.42 -1.246 C17 whereas the peaks at 430 and are assigned to ring out- -1.42”
FTIR and FT Raman, molecular geometry, vibrational assignments, ab initio and density functional theory calculations for 1,5-methylnaphthalene DOI: 10.1016/j.saa.2010.09.002 -
Nitrate Vertrauen 1,0
“mixture of the precursor salts by mixing solutions of ~545cm-1 ~430cm-1 The peaks at and below wave each La(NO 3) 3.6H 2O (Loba Chemie), Fe(NO 3) 3.9H 2O numbers correspond to M-O and O-M-O bond of the (Qualigens) and HAuCl 4.xH 2O (SRL) in”
Nikam 和 Athawale - 2013 - Effect of Base and Dopant Concentration on Phase F DOI: 10.1063/1.4810567 -
Vertrauen 1,0
“Furthermore, the spectrum of the TiO NPs revealed a strong band 2 14 15 cm-1 cm-1, at 616 and a less intense peak at 430.09 which also corresponds to Ti-O stretching”
Ntozakhe 等 - 2019 - Influence of nitrogen doping on TiO2 nanoparticles DOI: 10.1088/2053-1591/ab2260 -
Metal oxygen Vertrauen 1,0
“Due to the bridging bond.”
Raj 等 - 2015 - Nanostructured V2O5 thin films deposited at low sp DOI: 10.1016/j.mssp.2015.04.054 -
Silicon (Si) Vertrauen 1,0
“430cm-1 CB21 and CB22 were tested by Raman spectroscopy as shown in and are attributed to Si-O backbone bending vibration Figure 8A andFigure 8D, and the obtainedspectral peaks are multi- (Johnston et al., 2008).”
Cao 和 Gu - 2023 - Mineralogical and spectral characteristics of Chan DOI: 10.3389/feart.2023.1183522 -
Vertrauen 1,0
“At lower frequency, the band at 430 mode.36, 37 is attributed to the (Ni-O Ligand) Upon H 2S coordination, some relevant changes occur in the framework vibrational region in both the frequency and the relative intensities of the Raman bands”
Chavan 等 - 2013 - Fundamental Aspects of H2S Adsorption on CPO-27-Ni DOI: 10.1021/jp402440u
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.