What absorbs at 2989 cm⁻¹ in an FTIR spectrum?
A band near 2989 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Quick answer
A band near 2989 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Möjliga identifieringar av funktionella grupper
| Funktionell grupp | Stödjande fakta | Citerade källor | Högsta förtroende |
|---|---|---|---|
| Alkyl C-H | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Imide | 1 | 1 | 1,0 |
| Secondary amine | 1 | 0 | 1,0 |
| N h | 1 | 0 | 1,0 |
Rankingen speglar ackumulerade litteraturbevis, inte en enda auktoritativ regel. Bekräfta alltid mot din provkontext.
Possible materials
| Material | Stödjande toppar | Overlapping groups | Citerade källor |
|---|---|---|---|
| polypropylene | 2989, 1030, 1600 | Alkyl C-H, Hydroxyl (O-H) | 1 |
| PLA | 2989, 1650, 1073 | Alkyl C-H, Hydroxyl (O-H) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2989 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Litteratur bakom dessa identifieringar
-
Alkyl C-H förtroende 1,0
“peak at 2714 New peaks attributable to a dimethylacetal, C-H) HC(OCH 3) 2, appeared at 2832 (acetal carbon and 2989 cm-1 for the methyl groups.”
Razgon 等 - 2008 - Ozonolysis-based route to the in situ formation of DOI: 10.1021/la703120c -
Alkyl C-H förtroende 1,0
“cm-1 In case of AMPS, peak at 2989 is attributed to C-H stretching of-CH2 group.”
Development, characterization and In-vitro evaluation of guar gum based new polymeric matrices for controlled delivery using metformin HCl as model drug DOI: 10.1371/journal.pone.0271623 -
Hydroxyl (O-H) förtroende 1,0
“The broad negative associated regions between 3259 Regression coefficients of xylose and glucose prediction cm-1 (r and 2989 correspond to the O-H stretching vibraThe high correlation = 0.82) of the measured glucose tion of various compound”
Rapid estimation of sugar release from winter wheat straw during bioethanol production using FTIR-photoacoustic spectroscopy DOI: 10.1186/s13068-015-0267-2 -
Alkyl C-H förtroende 1,0
“LLM confirmed rule peak-group candidate”
Silva 等 - 2020 - Theoretical and Experimental Investigations on Inc DOI: 10.21577/0103-5053.20190273 -
Imide förtroende 1,0
“The bismaleThe absorptions around 2989 and 2912 due to the m-cresol imide (1 g, 0.002321 mol) was dissolved in (3.5 mL) C-H stretching vibration of CH group as shown in Fig.”
Sivasankari 等 - 2013 - Synthesis and Characterization of Thiophene Contai DOI: 10.14233/ajchem.2013.13514 -
Alkyl C-H förtroende 0,9
“Explicit assignment from text.”
Partial Biodegradable Blend with High Stability against Biodegradation for Fused Deposition Modeling DOI: 10.3390/polym14081541 -
Hydroxyl (O-H) förtroende 0,9
“C-H vibration of OH group”
Poly lactic acid production using the ring opening polymerization (ROP) method using Lewis acid surfactant combined iron (Fe) catalyst (Fe(DS)3) DOI: 10.1016/j.heliyon.2023.e17985
Har du ett spektrum med detta band?
Ladda upp ditt FTIR-spektrum och få en fullständig tolkningsrapport – toppidentifieringar med litteraturhänvisningar, biblioteksmatchningar och en förtroendebedömd beviskedja – på sekunder.