What absorbs at 2989 cm⁻¹ in an FTIR spectrum?
A band near 2989 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Resposta rápida
A band near 2989 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Possíveis atribuições de grupos funcionais
| Grupo funcional | Fatos de suporte | Fontes citadas | Maior confiança |
|---|---|---|---|
| Alkyl C-H | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Imide | 1 | 1 | 1,0 |
| Secondary amine | 1 | 0 | 1,0 |
| N h | 1 | 0 | 1,0 |
A classificação reflete a evidência acumulada da literatura, não uma única regra autoritária. Sempre confirme com o contexto da sua amostra.
Materiais possíveis
| Material | Picos de suporte | Grupos sobrepostos | Fontes citadas |
|---|---|---|---|
| polypropylene | 2989, 1030, 1600 | Alkyl C-H, Hydroxyl (O-H) | 1 |
| PLA | 2989, 1650, 1073 | Alkyl C-H, Hydroxyl (O-H) | 1 |
Os materiais são mostrados apenas quando o mesmo conjunto de literatura suporta esta banda e pelo menos um pico característico adicional.
Lógica do espectro
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2989 cm⁻¹ is usually not enough for material identification by itself.
Uso no mundo real
Este tipo de consulta é comum em identificação de polímeros, triagem de plásticos desconhecidos, solução de problemas de CQ, verificação de materiais reciclados e revisão de atribuição de picos apoiada pela literatura.
Erros comuns
- Tratar uma banda isolada como prova de um material sem verificar pelo menos um ou dois picos de suporte.
- Ignorando sobreposição: vários grupos funcionais podem contribuir próximo ao mesmo número de onda.
- Ignorar a validação quando aditivos, misturas, oxidação ou contaminação podem distorcer o espectro.
Conselho de verificação
Quando a ambiguidade persistir, valide a hipótese com DSC, GC-MS ou TGA, especialmente para misturas, amostras degradadas e polímeros carregados.
Literatura por trás destas atribuições
-
Alkyl C-H confiança 1,0
“peak at 2714 New peaks attributable to a dimethylacetal, C-H) HC(OCH 3) 2, appeared at 2832 (acetal carbon and 2989 cm-1 for the methyl groups.”
Razgon 等 - 2008 - Ozonolysis-based route to the in situ formation of DOI: 10.1021/la703120c -
Alkyl C-H confiança 1,0
“cm-1 In case of AMPS, peak at 2989 is attributed to C-H stretching of-CH2 group.”
Development, characterization and In-vitro evaluation of guar gum based new polymeric matrices for controlled delivery using metformin HCl as model drug DOI: 10.1371/journal.pone.0271623 -
Hydroxyl (O-H) confiança 1,0
“The broad negative associated regions between 3259 Regression coefficients of xylose and glucose prediction cm-1 (r and 2989 correspond to the O-H stretching vibraThe high correlation = 0.82) of the measured glucose tion of various compound”
Rapid estimation of sugar release from winter wheat straw during bioethanol production using FTIR-photoacoustic spectroscopy DOI: 10.1186/s13068-015-0267-2 -
Alkyl C-H confiança 1,0
“LLM confirmed rule peak-group candidate”
Silva 等 - 2020 - Theoretical and Experimental Investigations on Inc DOI: 10.21577/0103-5053.20190273 -
Imide confiança 1,0
“The bismaleThe absorptions around 2989 and 2912 due to the m-cresol imide (1 g, 0.002321 mol) was dissolved in (3.5 mL) C-H stretching vibration of CH group as shown in Fig.”
Sivasankari 等 - 2013 - Synthesis and Characterization of Thiophene Contai DOI: 10.14233/ajchem.2013.13514 -
Alkyl C-H confiança 0,9
“Explicit assignment from text.”
Partial Biodegradable Blend with High Stability against Biodegradation for Fused Deposition Modeling DOI: 10.3390/polym14081541 -
Hydroxyl (O-H) confiança 0,9
“C-H vibration of OH group”
Poly lactic acid production using the ring opening polymerization (ROP) method using Lewis acid surfactant combined iron (Fe) catalyst (Fe(DS)3) DOI: 10.1016/j.heliyon.2023.e17985
Tem um espectro com esta banda?
Carregue seu espectro FTIR e obtenha um relatório de interpretação completo — atribuições de picos com citações da literatura, correspondências de biblioteca e uma cadeia de evidências com nível de confiança — em segundos.