What absorbs at 2989 cm⁻¹ in an FTIR spectrum?
A band near 2989 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Réponse rapide
A band near 2989 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Attributions possibles de groupes fonctionnels
| Groupe fonctionnel | Faits à l＇appui | Sources citées | Confiance maximale |
|---|---|---|---|
| Alkyl C-H | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Imide | 1 | 1 | 1,0 |
| Secondary amine | 1 | 0 | 1,0 |
| N h | 1 | 0 | 1,0 |
Le classement reflète les preuves bibliographiques accumulées, et non une règle faisant autorité. Confirmez toujours dans le contexte de votre échantillon.
Matériaux possibles
| Matériel | Pics de support | Groupes chevauchants | Sources citées |
|---|---|---|---|
| polypropylene | 2989, 1030, 1600 | Alkyl C-H, Hydroxyl (O-H) | 1 |
| PLA | 2989, 1650, 1073 | Alkyl C-H, Hydroxyl (O-H) | 1 |
Les matériaux sont affichés uniquement lorsque le même ensemble de littérature soutient cette bande et au moins un pic caractéristique supplémentaire.
Logique du spectre
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2989 cm⁻¹ is usually not enough for material identification by itself.
Utilisation réelle
Ce type de requête est courant dans l＇identification des polymères, le criblage des plastiques inconnus, le dépannage du contrôle qualité, la vérification des matériaux recyclés et l＇examen de l＇attribution des pics appuyée par la littérature.
Erreurs courantes
- Traiter une bande isolée comme preuve d＇un matériau sans vérifier au moins un ou deux pics de support.
- Ignorer le chevauchement : plusieurs groupes fonctionnels peuvent contribuer près du même nombre d＇onde.
- Sauter la validation lorsque des additifs, des mélanges, l＇oxydation ou la contamination peuvent déformer le spectre.
Conseil de vérification
Lorsque l＇ambiguïté persiste, validez l＇hypothèse avec DSC, GC-MS ou TGA, en particulier pour les mélanges, les échantillons dégradés et les polymères chargés.
Bibliographie derrière ces attributions
-
Alkyl C-H confiance 1,0
“peak at 2714 New peaks attributable to a dimethylacetal, C-H) HC(OCH 3) 2, appeared at 2832 (acetal carbon and 2989 cm-1 for the methyl groups.”
Razgon 等 - 2008 - Ozonolysis-based route to the in situ formation of DOI: 10.1021/la703120c -
Alkyl C-H confiance 1,0
“cm-1 In case of AMPS, peak at 2989 is attributed to C-H stretching of-CH2 group.”
Development, characterization and In-vitro evaluation of guar gum based new polymeric matrices for controlled delivery using metformin HCl as model drug DOI: 10.1371/journal.pone.0271623 -
Hydroxyl (O-H) confiance 1,0
“The broad negative associated regions between 3259 Regression coefficients of xylose and glucose prediction cm-1 (r and 2989 correspond to the O-H stretching vibraThe high correlation = 0.82) of the measured glucose tion of various compound”
Rapid estimation of sugar release from winter wheat straw during bioethanol production using FTIR-photoacoustic spectroscopy DOI: 10.1186/s13068-015-0267-2 -
Alkyl C-H confiance 1,0
“LLM confirmed rule peak-group candidate”
Silva 等 - 2020 - Theoretical and Experimental Investigations on Inc DOI: 10.21577/0103-5053.20190273 -
Imide confiance 1,0
“The bismaleThe absorptions around 2989 and 2912 due to the m-cresol imide (1 g, 0.002321 mol) was dissolved in (3.5 mL) C-H stretching vibration of CH group as shown in Fig.”
Sivasankari 等 - 2013 - Synthesis and Characterization of Thiophene Contai DOI: 10.14233/ajchem.2013.13514 -
Alkyl C-H confiance 0,9
“Explicit assignment from text.”
Partial Biodegradable Blend with High Stability against Biodegradation for Fused Deposition Modeling DOI: 10.3390/polym14081541 -
Hydroxyl (O-H) confiance 0,9
“C-H vibration of OH group”
Poly lactic acid production using the ring opening polymerization (ROP) method using Lewis acid surfactant combined iron (Fe) catalyst (Fe(DS)3) DOI: 10.1016/j.heliyon.2023.e17985
Avez-vous un spectre avec cette bande ?
Téléchargez votre spectre FTIR et obtenez un rapport d＇interprétation complet — attributions de pics avec citations bibliographiques, correspondances de bibliothèque et une chaîne de preuves avec évaluation de la confiance — en quelques secondes.