What absorbs at 2989 cm⁻¹ in an FTIR spectrum?
A band near 2989 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Schnelle Antwort
A band near 2989 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Imide | 1 | 1 | 1,0 |
| Secondary amine | 1 | 0 | 1,0 |
| N h | 1 | 0 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polypropylene | 2989, 1030, 1600 | Alkyl C-H, Hydroxyl (O-H) | 1 |
| PLA | 2989, 1650, 1073 | Alkyl C-H, Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2989 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“peak at 2714 New peaks attributable to a dimethylacetal, C-H) HC(OCH 3) 2, appeared at 2832 (acetal carbon and 2989 cm-1 for the methyl groups.”
Razgon 等 - 2008 - Ozonolysis-based route to the in situ formation of DOI: 10.1021/la703120c -
Alkyl C-H Vertrauen 1,0
“cm-1 In case of AMPS, peak at 2989 is attributed to C-H stretching of-CH2 group.”
Development, characterization and In-vitro evaluation of guar gum based new polymeric matrices for controlled delivery using metformin HCl as model drug DOI: 10.1371/journal.pone.0271623 -
Hydroxyl (O-H) Vertrauen 1,0
“The broad negative associated regions between 3259 Regression coefficients of xylose and glucose prediction cm-1 (r and 2989 correspond to the O-H stretching vibraThe high correlation = 0.82) of the measured glucose tion of various compound”
Rapid estimation of sugar release from winter wheat straw during bioethanol production using FTIR-photoacoustic spectroscopy DOI: 10.1186/s13068-015-0267-2 -
Alkyl C-H Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Silva 等 - 2020 - Theoretical and Experimental Investigations on Inc DOI: 10.21577/0103-5053.20190273 -
Imide Vertrauen 1,0
“The bismaleThe absorptions around 2989 and 2912 due to the m-cresol imide (1 g, 0.002321 mol) was dissolved in (3.5 mL) C-H stretching vibration of CH group as shown in Fig.”
Sivasankari 等 - 2013 - Synthesis and Characterization of Thiophene Contai DOI: 10.14233/ajchem.2013.13514 -
Alkyl C-H Vertrauen 0,9
“Explicit assignment from text.”
Partial Biodegradable Blend with High Stability against Biodegradation for Fused Deposition Modeling DOI: 10.3390/polym14081541 -
Hydroxyl (O-H) Vertrauen 0,9
“C-H vibration of OH group”
Poly lactic acid production using the ring opening polymerization (ROP) method using Lewis acid surfactant combined iron (Fe) catalyst (Fe(DS)3) DOI: 10.1016/j.heliyon.2023.e17985
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.