What absorbs at 2262 cm⁻¹ in an FTIR spectrum?
A band near 2262 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Quick answer
A band near 2262 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Iespējamie funkcionālo grupu piešķīrumi
| Funkcionālā grupa | Atbalstošie fakti | Citētie avoti | Augstākā pārliecība |
|---|---|---|---|
| N c o | 3 | 3 | 1,0 |
| Isocyanate | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
Rangs atspoguļo uzkrātos literatūras pierādījumus, nevis vienu autoritatīvu noteikumu. Vienmēr apstipriniet atbilstoši parauga kontekstam.
Possible materials
| Materiāls | Atbalstošie pīķi | Overlapping groups | Citētie avoti |
|---|---|---|---|
| polyurethane | 2262, 2270, 1700 | N h | 2 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2262 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatūra aiz šiem piešķīrumiem
-
N c o pārliecība 1,0
“LLM confirmed rule peak-group candidate”
Preparation of one-shot and two-shot method of semi-rigid polyurethane film based on functionalized liquid natural rubber DOI: 10.1063/1.5047200 -
Isocyanate pārliecība 1,0
“cm-1 were visualized with the high-resolution Carl Zeiss The peak at wavenumber 2262 almost disappeared 300VP, working with Gemini SEM Technology and able due to the depletion of the isocyanate group (NCO) in the to detect a pressure of 150”
Ertugral - 2022 - Production and characterization of polyurethaneex DOI: 10.14314/polimery.2022.11.6 -
N c o pārliecība 1,0
“The signals at 31 ppm and 42 cm-1 The band at 2262 was associated to free -NCO HDICNW ppm in the spectra of were attributed to cm-1”
Haraguchi 等 - 2013 - Glycerol-derived polyurethane nanocomposites conta DOI: 10.4025/actascitechnol.v35i4.20276
Vai jums ir spektrs ar šo joslu?
Augšupielādējiet savu FTIR spektru un dažu sekunžu laikā iegūstiet pilnu interpretācijas ziņojumu — maksimumu piešķīrumus ar literatūras atsaucēm, bibliotēku saskaņošanu un pārliecības līmeņa pierādījumu ķēdi.