What absorbs at 2102 cm⁻¹ in an FTIR spectrum?
A band near 2102 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
Schnelle Antwort
A band near 2102 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Adsorbed carbon monoxide | 1 | 1 | 1,0 |
| Protein | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| C#c | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| TiO | 2102, 1730, 1699 | Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2102 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
C#c Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Experimental and computational chemistry studies on the inhibition of aluminium and mild steel in 0. DOI: 10.1080/16583655.2018.1500514 -
Vertrauen 1,0
“2 cm-1 C-H 2102.022 could be caused by the stretch of the N-H bond of the methylene groups of protein and the stretch salt.18 of the amine The above result is most likely owing to the been shown that the carbon sheath and nanointerface, onc”
Rizwan 等 - 2023 - Enterobacter hormaechei-Driven Novel Biosynthesis DOI: 10.1021/acsomega.3c02932 -
Adsorbed carbon monoxide Vertrauen 1,0
“In the spectrum of the 2.5%Zn/TiO catalyst, only one 2 Materials 2023, 16, x FOR PEER REVIEW 8 of 17 cm-1 band at 2102 can be observed, associated with CO adsorbed linearly on Zn atoms in the monometallic system.”
Samadi 等 - 2023 - Zn Modification of PdTiO2Ti Catalyst for CO Oxid DOI: 10.3390/ma16031216 -
Vertrauen 0,9
“Band at 2102 attributed to ferricyanide”
Cheah 和 Chernev - 2021 - Electrochemical oxidation of ferricyanide DOI: 10.1038/s41598-021-02355-3
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.