What absorbs at 1779 cm⁻¹ in an FTIR spectrum?
A band near 1779 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 5 cited sources
Quick answer
A band near 1779 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
可能的官能团归属
| 官能团 | 支持性事实 | 引用来源 | 最高置信度 |
|---|---|---|---|
| Carbonyl (C=O) | 5 | 5 | 1.0 |
| Imide | 2 | 2 | 1.0 |
| Ring structure | 1 | 1 | 1.0 |
| Alkyl C-H | 1 | 1 | 1.0 |
排名反映了累积的文献证据，而非单一的权威规则。请始终对照您的样品背景进行确认。
Possible materials
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1779 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
这些分配背后的文献
-
Imide 置信度 1.0
“the unaged CBR 320/328 composites reveal three imide carbonyl peaks at 1779, 1728 and 1712 These peaks may be assigned to the symmetric and asymmetric stretches of an unsaturated imide (1779 and 1728 cm(cid:2)1)”
Fox 等 - 2004 - Investigation of failure mechanisms in aged aerosp DOI: 10.1016/j.engfailanal.2003.05.010 -
Carbonyl (C=O) 置信度 1.0
“Fourier Transt Copyright: American Scientific Publishers cm-1, form Infrared Spectroscopy (FTIR) spectra shows two new absorbance peaks at 1779 and 1851 which i Delivered by Ingenta c correspond to symmetrical and asymmetrical stretching vi”
Compatibilization effect of EVA-g-MAH on mechanical, morphological and rheological properties of recycled PC/ABS blend DOI: 10.1166/mex.2014.1198 -
Alkyl C-H 置信度 1.0
“Peaks that can only be assigned to polyimide in the blend include the methyl group C-H stretching cm-1), cm-1), C=O (symmetric stretching) (1779 C=O (anti-symetric stretching) (2957-2863 cm-1),”
Maab 等 - 2009 - SPEEKPolyimide Blends for Proton Conductive Membr DOI: 10.1002/fuce.200800121 -
Carbonyl (C=O) 置信度 1.0
“In the FTIR cm(cid:3)1 spectrum strong absorption bands appeared at 1779 due to the asymmetric vibration of the carbonyl imide ring, at 1719 cm(cid:3)1 attributed to the symmetric vibration of carbonyl imide”
Serbezeanu 等 - 2016 - Phosphorus-containing polyimide fibers and their t DOI: 10.1039/c6ra06497c -
Carbonyl (C=O) 置信度 0.95
“Explicit assignment: 'the C=O (of SMA) peak at a wavelength of 1779'”
The effect of Styrene Maleic Anhydride on the microstructure evolution of PSF-based membrane prepared by thermal-induced phase separation method DOI: 10.1016/j.mtcomm.2019.100687
是否有此波段的光谱？
上传您的FTIR光谱，几秒钟内即可获得完整的解读报告——包含带文献引用的峰分配、库匹配和带有置信度评级的证据链。