Was absorbiert bei 1637 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1637 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1637 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Amide | 40 | 36 | 1,0 |
| Carbonyl (C=O) | 30 | 28 | 1,0 |
| Methacrylate | 26 | 26 | 1,0 |
| Acetate | 23 | 23 | 1,0 |
| Ester | 22 | 22 | 1,0 |
| Carboxyl (COOH) | 21 | 21 | 1,0 |
| Alkene (C=C) | 21 | 18 | 1,0 |
| Hydroxyl (O-H) | 20 | 20 | 1,0 |
| Ketone | 20 | 20 | 1,0 |
| Water (H2O) | 18 | 17 | 1,0 |
| N h | 12 | 12 | 1,0 |
| Secondary amine | 6 | 6 | 1,0 |
| Silicon-oxygen (Si-O) | 5 | 5 | 1,0 |
| Protein | 5 | 5 | 1,0 |
| Silicon (Si) | 4 | 4 | 1,0 |
| C c single bond | 4 | 4 | 1,0 |
| C n single bond | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 4 | 4 | 1,0 |
| C-O single bond | 4 | 4 | 1,0 |
| Alkyl C-H | 4 | 4 | 1,0 |
| Protein beta sheet | 4 | 4 | 0,9 |
| Siloxane (Si-O-Si) | 3 | 3 | 1,0 |
| Carbohydrate | 3 | 3 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Protein alpha helix | 3 | 2 | 1,0 |
| Bronsted acid site | 2 | 2 | 1,0 |
| Bromine | 2 | 2 | 1,0 |
| N-O bond | 2 | 2 | 1,0 |
| Urethane | 2 | 2 | 1,0 |
| Carbon dioxide | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Nitrogen heterocycle | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Anhydride | 1 | 1 | 1,0 |
| Oxalate | 1 | 1 | 1,0 |
| Aldehyde (CHO) | 1 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 0,9 |
| Chitosan | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| starch | 1637, 1650, 1540 | Methacrylate, Acetate, Amide | 1 |
| montmorillonite | 1637, 523, 1743 | Methacrylate, Acetate, Amide | 1 |
| nanocomposites | 1637, 1717, 1630 | Methacrylate, Acetate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1637 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“Therefore, the very strong band in IR at 1637 and quency of C O stretching dependant on various factors.”
Arjunan 等 - 2007 - Fourier transform infrared and Raman spectral assi DOI: 10.1016/j.saa.2006.09.044 -
Vertrauen 1,0
“cm(cid:0) 1 granules, including the amylose content, distribution of branch chains of Prominent peak in the region of 1637 revealed the presence of (-N-H) amylopectin, interactions of amylose-amylose and amylose-lipid could amine group (Ng”
Encapsulating probiotics in novel resistant starch wall material for production of rice flour extrudates DOI: 10.1016/j.lwt.2020.110839 -
Amide Vertrauen 1,0
“cm-1 The FTIR band at 1637 corresponds to Amide I of collagen [25] that exists in the raw HAP of bovine bone powder and is completely removed in calcined HAP samples.”
XRD and FTIR study of A&B type carbonated hydroxyapatite extracted from bovine bone DOI: 10.1063/1.5089399 -
Hydroxyl (O-H) Vertrauen 1,0
“The two bands observed cm-1 at 1637 and 1436 are associated with the deformation of the -OH groups of water”
Caliman 等 - 2023 - Gellan Gum-Montmorillonite Nanocomposites for Elec DOI: 10.3390/coatings13020350 -
Alkene (C=C) Vertrauen 1,0
“lymerized, was determined by the ratio of the absorbance peak corresponding to the aliphatic carMethodology cm-1 bon-carbon double bond (1637 peak height)”
Collares 等 - 2014 - Discrepancies in degree of conversion measurements DOI: 10.1590/S1806-83242013000600002 -
Hydroxyl (O-H) Vertrauen 1,0
“These cm-1 cm-1 two peaks at 3270-3273 (O-H stretching) and 1637 (approx.) (scissoring of two H atoms bonded with samples43-45.”
Analysis of the ex-vivo transformation of semen, saliva and urine as they dry out using ATR-FTIR spectroscopy and chemometric approach DOI: 10.1038/s41598-021-91009-5 -
Lignin Vertrauen 1,0
“There were also no changes or shifts near 1514 and 1637 cm-1 wavenumbers which associated with lignin compounds [6].”
Firsoni 等 - 2019 - Fiber Content and Relative Feed Value Estimation o DOI: 10.1088/1757-899X/546/4/042008 -
Alkene (C=C) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Galvo 等 - 2010 - Influence of light guide tip used in the photo-act DOI: 10.1134/S1054660X10190059
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.