황 — FTIR 흡수 피크 및 할당
다음은 황가 흡수하는 경향이 있는 특징적인 FTIR 파수로, 출판된 문헌을 바탕으로 수집하고 뒷받침 근거에 따라 순위를 지정했습니다. 각 할당은 출처(DOI)로 추적할 수 있으며, 320,000+개의 참조 스펙트럼 및 지식 그래프와 교차 검증되었습니다.
8개의 인용 출처를 바탕으로 합니다
빠른 답변
황는 일반적으로 정확한 교과서 숫자 하나보다는 반복되는 특징적 피크 클러스터를 찾아 할당됩니다. 아래 표는 문헌에서 이 그룹을 FTIR에서 가장 자주 배치하는 위치를 누적 증거 순으로 보여줍니다.
황의 특성 FTIR 피크
| 파수 (cm⁻¹) | 지원 사실 | 인용 출처 | 최고 신뢰도 |
|---|---|---|---|
| 1635 | 1 | 1 | 1.0 |
| 725 | 1 | 1 | 1.0 |
| 715 | 1 | 1 | 1.0 |
| 2159 | 1 | 1 | 1.0 |
| 1238 | 1 | 1 | 1.0 |
| 1000 | 1 | 1 | 1.0 |
| 1075 | 1 | 1 | 1.0 |
| 1695 | 1 | 1 | 1.0 |
| 1175 | 1 | 1 | 1.0 |
| 500 | 1 | 1 | 1.0 |
| 2550 | 1 | 1 | 1.0 |
| 1230 | 1 | 1 | 1.0 |
| 1010 | 1 | 1 | 1.0 |
| 798 | 1 | 1 | 1.0 |
| 1598 | 1 | 1 | 1.0 |
| 2870 | 1 | 1 | 0.9 |
| 550 | 1 | 1 | 0.9 |
| 644 | 1 | 1 | 0.9 |
| 3439 | 1 | 1 | 0.5 |
| 637 | 1 | 1 | 0.3 |
| 773 | 1 | 1 | 0.3 |
| 665 | 1 | 0 | 1.0 |
| 635 | 1 | 0 | 0.7 |
스펙트럼 로직
여러 예상 밴드가 함께 나타날 때 작용기 할당이 더 확실해집니다. 이 페이지를 사용하여 가장 강력하게 지원되는 피크를 찾은 다음, 동일한 샘플이 단일 고립된 히트가 아닌 일관된 패턴을 보이는지 확인하세요.
실제 사용
이 페이지는 미지 물질 분석, 보고서의 피크 설명, 폴리머 문제 해결, 후보 물질군이 화학적으로 타당한지 확인하는 데 유용합니다.
일반적인 실수
- 스펙트럼의 나머지 부분을 확인하지 않고 하나의 기능 그룹 페이지를 완전한 재료 판정으로 사용하는 것.
- 가장 강한 밴드가 항상 가장 진단적이라고 가정합니다.
- 가공, 첨가제, 노화 및 혼합물이 예상 피크를 이동시키거나 넓힐 수 있다는 것을 잊는 것.
검증 조언
여러 물질군이 유사한 밴드를 공유하거나 혼합 효과로 FTIR 할당이 불확실할 때 DSC, GC-MS 또는 TGA를 사용하십시오.
이 할당의 배경이 되는 문헌
-
1598 cm⁻¹ 신뢰도 1.0
“1598 및 양쪽의 피크는 결합 에너지 168.5eV로, 이는 황에 기인합니다.”
The electrochemical activity of sulfonic acid ring-substituted polyaniline in the wide pH range DOI: 10.1016/j.synthmet.2004.12.015 -
798 cm⁻¹ 신뢰도 1.0
“이 구조에서 탄소-산소 결합 주변의 피크는 mendisplacement가 798 cm -1 730 cm에서 발생하여 탄소-황 신축 진동으로 귀속될 수 있습니다.”
A case study of poly (aryl ether sulfone) hemodialysis membrane interactions with human blood: Molecular dynamics simulation and experimental analyses DOI: 10.1016/j.cmpb.2020.105742 -
2585 cm⁻¹ 신뢰도 1.0
“Another reduced peak was at the wavenumber of The maximum adsorption capacity was calculated using the UT 2585cm-1 which showed that sulfur groups were also responsible for 175 Y.”
Microfluidics combined with ionic gelation method for production of nanoparticles based on thiol-functionalized chitosan to adsorb Hg (II) from aqueous solutions DOI: 10.1016/j.jenvman.2019.02.124 -
403 cm⁻¹ 신뢰도 1.0
“This hypothesis is supported by the boiling The sequence of the next three exothermic peaks with maxima at 403 440 and ◦C 465 was associated with the vaporization of the gas mixture resulting from thermal point of sulfur being 444.6 °C [37-”
Toulbe 等 - 2022 - Photodegradation of Azathioprine in the Presence o DOI: 10.3390/ijms23073975 -
1230 cm⁻¹ 신뢰도 1.0
“keratin;14 the sharper peak at 1230 indicates 20(cid:2) of the down powder is other hand, the peak at some changes in sulfur-containing groups during lower and blunter than that of the down fiber, and the milling process.”
Xu 等 - 2009 - Characterization of Superfine Down Powder DOI: 10.1002/app.29205 -
2556 cm⁻¹ 신뢰도 1.0
“cm-1 약 2556.2의 피크가 둥글게 되어 황 원자의 고립 전자쌍에 기인함을 보여줍니다.”
Specific interaction between fluorine atoms and thiol groups accounting for higher domain purity and photostability in narrowband BHJ systems DOI: 10.1002/polb.24849 -
429 cm⁻¹ 신뢰도 1.0
“4 cm-1 429 band is related to the vibration of two tetrahedra (e) Geprop 3 that are connected through bridging sulfur at the corner cm-1 and the 376 is a companion band regarded to the tetrahedra.29 vibration of two edge-shared The bands 14”
New Flexible and Transparent Solution-Based Germanium-Sulfide Polymeric Materials DOI: 10.5935/0103-5053.20150065 -
2550 cm⁻¹ 신뢰도 1.0
“On the cm-1 other hand, the absence of the strong S-H stretching vibration of L-Cys at around 2550 in CAE-AgNPs indicates the confirmation of binding of sulfur part from L-Cys to CAE-AgNPs surface after the cleavage of group54,55.”
Bioinspired 5-caffeoylquinic acid capped silver nanoparticles using Coffee arabica leaf extract for high-sensitive cysteine detection DOI: 10.1038/s41598-023-34944-9
자신의 스펙트럼에서 황 보기
FTIR 스펙트럼을 업로드하면 피크 할당(문헌 인용 포함), 라이브러리 일치, 문헌 기반 분석 등 전체 해석 보고서를 몇 초 안에 얻을 수 있습니다.
