Sulfonyl — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Sulfonyl tendenziell absorbiert, zusammengestellt aus veröffentlichter Literatur und nach unterstützenden Belegen geordnet. Jede Zuordnung ist auf eine Quelle (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Sulfonyl wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Sulfonyl
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 1169 | 2 | 2 | 1,0 |
| 1035 | 2 | 1 | 1,0 |
| 1408 | 1 | 1 | 1,0 |
| 846 | 1 | 1 | 1,0 |
| 1267 | 1 | 1 | 1,0 |
| 1150 | 1 | 1 | 1,0 |
| 1029 | 1 | 1 | 1,0 |
| 1290 | 1 | 1 | 1,0 |
| 1440 | 1 | 1 | 1,0 |
| 1218 | 1 | 1 | 1,0 |
| 1088 | 1 | 1 | 1,0 |
| 1240 | 1 | 1 | 1,0 |
| 1030 | 1 | 1 | 1,0 |
| 1255 | 1 | 1 | 1,0 |
| 1021 | 1 | 1 | 1,0 |
| 975 | 1 | 1 | 1,0 |
| 1320 | 1 | 1 | 1,0 |
| 863 | 1 | 1 | 1,0 |
| 1069 | 1 | 1 | 1,0 |
| 1020 | 1 | 1 | 1,0 |
| 1651 | 1 | 1 | 1,0 |
| 612 | 1 | 1 | 1,0 |
| 1481 | 1 | 1 | 0,9 |
| 1037 | 1 | 1 | 0,9 |
| 1129 | 1 | 1 | 0,9 |
| 1184 | 1 | 1 | 0,9 |
| 1080 | 1 | 1 | 0,9 |
| 1219 | 1 | 1 | 0,9 |
| 1294 | 1 | 1 | 0,9 |
| 1171 | 1 | 1 | 0,9 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 35 für Sulfonyl an.
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
1035 cm⁻¹ Vertrauen 1,0
“FTIR showed peak at 26 cm-1 1035 which corresponded to O=S=O stretching of sulphonic (-SO 3H) group.”
Balan 等 - 2021 - Esterification of residual palm oil using solid ac DOI: 10.1016/j.jtice.2012.07.001. -
1651 cm⁻¹ Vertrauen 1,0
“Meanwhile, the presence of the peak at the 1651 cm-1, were assigned asymmetric O=S=O sulfonic group in SPEEK was confirmed by the sharp peak at 1024.13 cm-1, which were stretching vibration.”
Hasbullah 等 - 2016 - Synthesis and Characterizations of Electrospun Sul DOI: 10.1063/1.4948867 -
1020 cm⁻¹ Vertrauen 1,0
“cm-1 cm-1 new bands at 1020 and 1080 can be attributed to the asymmetric and symmetric stretching of the O=S=O group [17,22,23].”
Vibrational spectroscopic study of pure and silica-doped sulfonated poly(ether ether ketone) membranes DOI: 10.1016/j.saa.2014.12.004 -
1320 cm⁻¹ Vertrauen 1,0
“1406.20 3 C=C 1406.37 1406.20 asymmetric O=S=O stretching of sulfone group 1320.34 and 1297.21 1320.22 and 1297.15 4 asymmetric O=S=O stretch5 C-O-C 1238.25”
Suhalim 等 - 2023 - Impact of Silver-Decorated Graphene Oxide (Ag-GO) DOI: 10.3390/membranes13060602 -
975 cm⁻¹ Vertrauen 1,0
“The symmetric symmetric and asymmetric S(=O) stretching vibration and asymmetric O=S=O stretching vibration peaks are 2 peaks and S-N-C absorptions, which appears at 975 cm-1, located at 1180 and 1359 respectively.”
Tosa 等 - 2012 - Simultaneous Determination Of Some Artificial Swee DOI: 10.1063/1.3681976 -
1021 cm⁻¹ Vertrauen 1,0
“adsorption peak due to C-O stretching at 1105 By comparing spectra of polymer blend membrane with that for GA-cross-linked PVA membrane, new absorption bands are cm-1 noticed at 1021 and 1112 due to the symmetric and asymmetric O=S=O stretc”
Highly Conductive Polyelectrolyte Membranes Poly(vinyl alcohol)/Poly(2-acrylamido-2-methyl propane sulfonic acid) (PVA/PAMPS) for Fuel Cell Application DOI: 10.3390/polym13162638 -
1255 cm⁻¹ Vertrauen 1,0
“FTIR spectra of potato starch (1) and sodium salt of sulfated starch (2) In the FTIR spectra of sulfated starch, in contrast to the original starch, there is a highcm-1, intensity band at 1255 which belongs to asymmetric stretching vibratio”
Akman 等 - 2020 - Synthesis and characterization of starch sulfates DOI: 10.1016/j.carbpol.2012.07.075 -
1030 cm⁻¹ Vertrauen 1,0
“The LOD and aliphatic lactam 1767cm-1, 1030cm-1 υ and (O=S=O) band at and the LOQ values were determined from the linear calibration 1124cm-1.”
Ali 等 - 2017 - Solid-State FTIR Spectroscopic Study of Two Binary DOI: 10.1155/2017/5673214
Sehen Sie Sulfonyl in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.