Sulfonate — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Sulfonate tendenziell absorbiert, zusammengestellt aus veröffentlichter Literatur und nach unterstützenden Belegen geordnet. Jede Zuordnung ist auf eine Quelle (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Sulfonate wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Sulfonate
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 1036 | 2 | 2 | 1,0 |
| 1040 | 2 | 1 | 1,0 |
| 636 | 1 | 1 | 1,0 |
| 1636 | 1 | 1 | 1,0 |
| 1527 | 1 | 1 | 1,0 |
| 1114 | 1 | 1 | 1,0 |
| 656 | 1 | 1 | 1,0 |
| 1226 | 1 | 1 | 1,0 |
| 570 | 1 | 1 | 1,0 |
| 875 | 1 | 1 | 1,0 |
| 867 | 1 | 1 | 1,0 |
| 1369 | 1 | 1 | 1,0 |
| 1161 | 1 | 1 | 1,0 |
| 1035 | 1 | 1 | 1,0 |
| 1174 | 1 | 1 | 1,0 |
| 1183 | 1 | 1 | 1,0 |
| 1162 | 1 | 1 | 1,0 |
| 1050 | 1 | 1 | 1,0 |
| 1022 | 1 | 1 | 1,0 |
| 1071 | 1 | 1 | 1,0 |
| 1123 | 1 | 1 | 1,0 |
| 1055 | 1 | 1 | 1,0 |
| 1340 | 1 | 1 | 1,0 |
| 413 | 1 | 1 | 1,0 |
| 537 | 1 | 1 | 1,0 |
| 985 | 1 | 1 | 1,0 |
| 1190 | 1 | 1 | 1,0 |
| 844 | 1 | 1 | 1,0 |
| 3373 | 1 | 1 | 1,0 |
| 1710 | 1 | 1 | 1,0 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 43 für Sulfonate an.
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
3433 cm⁻¹ Vertrauen 1,0
“Then, the functional group of the cm-1 of the sulfonated group SPEEK was determined using Fourier transfer infrared (FTIR) showed O-H vibration at 3433 (SO2-OH).”
Hasbullah 等 - 2016 - Synthesis and Characterizations of Electrospun Sul DOI: 10.1063/1.4948867 -
1402 cm⁻¹ Vertrauen 1,0
“There are three vibrations at 1402, 1330, cm-1 and 1079 due to S=O stretching, the sulfonate group (SO 3) as it is connected to the 10”
Power-Dependent Nonlinear Optical Behaviours of Ponceau BS Chromophore at 532 nm via Z-Scan Technique DOI: 10.1016/j.jphotochem.2020.112574 -
1052 cm⁻¹ Vertrauen 1,0
“During fuel cell operation, an oxyintensity of peaks in this region for the nanocomposite gen reduction reaction can proceed through two eleccm-1 membrane.61 Also, the peaks at 1052 and 1074 were trons pathway (ie, incomplete reduction) in”
Simultaneous improvement of ionic conductivity and oxidative stability of sulfonated poly(ether ether ketone) nanocomposite proton exchange membrane for fuel cell application DOI: 10.1002/er.5094 -
1710 cm⁻¹ Vertrauen 1,0
“Moreover, the peak at 1710 which is related to the vibration of the C = O bonds, is more intense in the sulfonated lignins compared to RL [45].”
Microsoft Word - Zadeh_ Valorization of bagasse alkali lignin to water-soluble derivatives through chemical modification_AAM.docx DOI: 10.1016/j.rser.2016.10.082 -
3373 cm⁻¹ Vertrauen 1,0
“The peaks observed at 3373, 1221, 1037, 1157, 924 and 844 cm-1 can be attributed cm-1 1356-1374 attributed to sulphate (SO 3) group stretching in 1.5-3% CARR:SA (1:0) wafers.”
Akiyode 和 Boateng - 2018 - Composite Biopolymer-Based Wafer Dressings Loaded DOI: 10.3390/polym10080918 -
1190 cm⁻¹ Vertrauen 1,0
“the peaks at 1190 cm-1 cm-1 and 985 can be assigned to the asymmetric and symmetric stretching of SO 3.”
Anis 等 - 2023 - Studies on Polybenzimidazole and Methanesulfonate DOI: 10.3390/polym15132821 -
1055 cm⁻¹ Vertrauen 1,0
“at 1055 cm-1 observed in the IR spectra is characteristic for the stretching vibrations of SO3 13C The synthesized SPNBIs were examined by solid-state NMR spectroscopy groups in sulfonic acids.”
One-Step Synthesis of Functional Sulfonated Polynaphthoylenebenzimidazoles for Biosensing Applications DOI: 10.3390/app13021073 -
1123 cm⁻¹ Vertrauen 1,0
“The S-O symCySO 2-S-Cy (1121 was found for keratin hydrolysates at 1121.9-1123.3 The cm-1 metric stretch band attributed to Cy-S-SO3 (Bunte salt) at 1015.8-1021.1 cm-1 and S-O S-O symmetric stretch band attributed to Cy-S-SO (Bunte salt) at”
Gaidau 等 - 2021 - Wool Keratin Hydrolysates for Bioactive Additives DOI: 10.3390/ma14164696
Sehen Sie Sulfonate in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.