Styrene — FTIR absorption peaks and assignments
These are the characteristic FTIR wavenumbers where Styrene tends to absorb, compiled from published literature and ranked by supporting evidence. Each assignment is traceable to a source (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Resposta rápida
Styrene is usually assigned by looking for a recurring cluster of characteristic peaks rather than one exact textbook number. The table below shows where the literature most often places this group in FTIR, ranked by accumulated evidence.
Characteristic FTIR peaks for Styrene
| Número de onda (cm⁻¹) | Fatos de suporte | Fontes citadas | Maior confiança |
|---|---|---|---|
| 698 | 1 | 1 | 1,0 |
| 960 | 1 | 1 | 1,0 |
| 2700 | 1 | 1 | 1,0 |
| 696 | 1 | 1 | 1,0 |
| 700 | 1 | 1 | 1,0 |
| 682 | 1 | 1 | 1,0 |
| 701 | 1 | 1 | 1,0 |
| 1450 | 1 | 1 | 1,0 |
| 3628 | 1 | 1 | 1,0 |
| 3062 | 1 | 1 | 1,0 |
| 1461 | 1 | 1 | 1,0 |
| 1601 | 1 | 1 | 1,0 |
| 3054 | 1 | 1 | 1,0 |
| 3081 | 1 | 1 | 1,0 |
| 1220 | 1 | 1 | 1,0 |
| 699 | 1 | 1 | 0,9 |
| 966 | 1 | 1 | 0,9 |
| 911 | 1 | 0 | 1,0 |
| 1000 | 1 | 0 | 1,0 |
| 3082 | 1 | 0 | 0,8 |
| 3000 | 1 | 0 | 0,8 |
Lógica do espectro
Uma atribuição de grupo funcional se torna mais confiável quando várias bandas esperadas aparecem juntas. Use esta página para encontrar os picos com maior suporte e, em seguida, confirme que a mesma amostra exibe um padrão coerente, em vez de um único pico isolado.
Uso no mundo real
Estas páginas são úteis para análise de material desconhecido, explicação de picos em relatórios, solução de problemas de polímeros e verificação se uma família de materiais candidata é quimicamente plausível.
Erros comuns
- Usar uma página de grupo funcional como veredito completo do material sem verificar o resto do espectro.
- Assumindo que a banda mais forte é sempre a mais diagnóstica.
- Esquecer que processamento, aditivos, envelhecimento e misturas podem deslocar ou alargar os picos esperados.
Conselho de verificação
Use DSC, GC-MS ou TGA quando várias famílias de materiais compartilham bandas semelhantes ou quando efeitos de mistura tornam a atribuição FTIR incerta.
Literatura por trás destas atribuições
-
1220 cm⁻¹ confiança 1,0
“The genband at 1220 which is attributed to a five membered eral procedure for esterification of poly(styrene maleic cyclic anhydride (Bellamy, 1975).”
Galgali 等 - 2007 - Sugar-linked biodegradable polymers Regio-specifi DOI: 10.1016/j.carbpol.2006.06.035 -
3081 cm⁻¹ confiança 1,0
“The intensityof styrene absorption lines (3081, 3060, 3026, 2922, 2851, Ni5+”
60MeV Ni ion induced modifications in nano-CdS/polystyrene composite films DOI: 10.1016/j.radphyschem.2013.06.022 -
3054 cm⁻¹ confiança 1,0
“6) show bands at 3054 and 2238.27 due to aromatic C H p-ABTAY Co-polymers of styrene with acrylonitrile initiated by 55 2014”
Synthesis and characterization of co-polymers of styrene with acrylonitrile initiated by <i>p</i>-acetylbenzylidene triphenylarsonium ylide DOI: 10.1163/1568555053084249 -
1601 cm⁻¹ confiança 1,0
“In addition, both spectra showed an absorption band at cm-1 C=C 1601 associated with the stretching of benzene ring of styrene moieties [28].”
Aguilar-Bolados 等 - 2020 - SEBS-Grafted Itaconic Acid as Compatibilizer for E DOI: 10.3390/polym12030643 -
1461 cm⁻¹ confiança 1,0
“The broad peak at ~1461 cm-1 corre3 represents the C=H bending vibrations of PES styrene groups [51].”
TiO2 Nanoparticle Filler-Based Mixed-Matrix PES/CA Nanofiltration Membranes for Enhanced Desalination DOI: 10.3390/membranes11060433 -
3062 cm⁻¹ confiança 1,0
“The positions of the IR bands cm-1, at 3062 and 3029 commonly used as diagnostic observed for FG1333 are listed and assigned by referpeaks for styrene modified resins [29].”
Polyurethane coatings used in twentieth century outdoor painted sculptures. Part I: comparative study of various systems by means of ATR-FTIR spectroscopy DOI: 10.1186/s40494-017-0124-7 -
3628 cm⁻¹ confiança 1,0
“transformation of epoxy group are observed at 1715 cm-1 bending of C-H double bond of vinyl groups, and 910 cm-1 A broad vibration between 3628 and 3142 is associated corresponds to double bonds of styrene monomer.”
Eduardo Correa 等 - 2017 - Influence of tribological test on the global conve DOI: 10.1590/0104-1428.14916 -
1450 cm⁻¹ confiança 1,0
“The band at 1450 can be assigned of 9.74% as well as styrene monomer of 41.87%.”
Filip 等 - 2013 - Investigation of thermal and catalytic degradation DOI: 10.2478/s11532-013-0202-y
See Styrene in your own spectrum
Carregue seu espectro FTIR e obtenha um relatório de interpretação completo — atribuições de picos com citações da literatura, correspondências de biblioteca e uma cadeia de evidências com nível de confiança — em segundos.