Secondary amine — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Secondary amine tendenziell absorbiert, zusammengestellt aus veröffentlichter Literatur und nach unterstützenden Belegen geordnet. Jede Zuordnung ist auf eine Quelle (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Secondary amine wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Secondary amine
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 3300 | 22 | 20 | 1,0 |
| 1650 | 21 | 21 | 1,0 |
| 1550 | 20 | 17 | 1,0 |
| 1240 | 16 | 14 | 1,0 |
| 1250 | 14 | 12 | 1,0 |
| 1380 | 13 | 11 | 1,0 |
| 1540 | 12 | 12 | 1,0 |
| 1600 | 12 | 12 | 1,0 |
| 1660 | 12 | 12 | 1,0 |
| 1400 | 11 | 11 | 1,0 |
| 3400 | 11 | 11 | 1,0 |
| 1545 | 11 | 10 | 1,0 |
| 1640 | 11 | 10 | 1,0 |
| 1560 | 11 | 9 | 1,0 |
| 1510 | 11 | 9 | 1,0 |
| 1310 | 10 | 10 | 1,0 |
| 1200 | 10 | 10 | 1,0 |
| 3500 | 10 | 10 | 1,0 |
| 1120 | 9 | 9 | 1,0 |
| 1370 | 9 | 9 | 1,0 |
| 1547 | 9 | 9 | 1,0 |
| 1570 | 9 | 8 | 1,0 |
| 1290 | 9 | 8 | 1,0 |
| 3200 | 9 | 8 | 1,0 |
| 1300 | 9 | 8 | 1,0 |
| 1530 | 9 | 7 | 1,0 |
| 400 | 8 | 8 | 1,0 |
| 1235 | 8 | 8 | 1,0 |
| 1630 | 8 | 7 | 1,0 |
| 1538 | 8 | 7 | 1,0 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 1101 für Secondary amine an.
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
1566 cm⁻¹ Vertrauen 1,0
“1566cm-1, R2 due to NH in-plane bending, triazine stretching In every case a, good linear fit was obtained with valand C-N stretching, respectively, [23] and so, these bands ues >0.999.”
Armenta 等 - 2004 - Determination of cyromazine in pesticide commercia DOI: 10.1016/j.aca.2004.02.063 -
968 cm⁻¹ Vertrauen 1,0
“2000cm-1, 1.21mgg-1 baseline established in for a ChlorThe absorption bands of Chlorpyrifos are located at 1549, pyrifosstandardandthenoisemeasuredinthesameregionfor 968cm-1, 1412, 1339, 1165, 1088, 1025 and due to C N a blank spectrum and”
Armenta 等 - 2005 - A validated and fast procedure for FTIR determinat DOI: 10.1016/j.talanta.2005.03.008 -
3420 cm⁻¹ Vertrauen 1,0
“The position of 3420cm-1 NH stretching vibration appears from 3500 to C O stretching vibration is particularly clear and is sensitive to 2 and the symmetric NH stretching is observed in the range O stretchits environment in the infrared [73”
Arjunan 等 - 2007 - Fourier transform infrared and Raman spectral assi DOI: 10.1016/j.saa.2006.09.044 -
2926 cm⁻¹ Vertrauen 1,0
“the samples with PG and the highest value in the FG sample, that is, 2923.74, 2926.15, from the CN stretch, CCN deformation and in-plane NH bending modes and is mostly cm-1 cm-1, 2927.71, and 2924.77 cm-1 for PG-FG 0-100, PG-FG 50-50, PG-FG”
Application of Poultry Gelatin to Enhance the Physicochemical, Mechanical, and Rheological Properties of Fish Gelatin as Alternative Mammalian Gelatin Films for Food Packaging DOI: 10.3390/foods12030670 -
1413 cm⁻¹ Vertrauen 1,0
“The absorption bands 1413 cm-1 3-, cm-1 cm-1 at 815.25 and 728.12 were assigned to the N-O bending vibration of NO and to C-N at 815.25 cm-1 and 728.12 cm-1 were assigned to the N-O bending vibration of NO3-, and to C-N stretching from the”
Effect of Ratio in Ammonium Nitrate on the Structural, Microstructural, Magnetic, and AC Conductivity Properties of BaFe12O19 DOI: 10.3390/ma11112190 -
3028 cm⁻¹ Vertrauen 1,0
“N-H peaks in the complexed materials are the stretching shifts in 3126cm-1 3028cm-1 4+ NH from to and that of the bending mode 1441cm-1 1433cm-1 H-N-H 0.001 of from to when 30 wt.”
Synthesis and characterizations of phthaloyl chitosan-based polymer electrolytes DOI: 10.1016/j.jnoncrysol.2012.04.019 -
1176 cm⁻¹ Vertrauen 1,0
“spectra of the PDPA in doped state, these being peaked at 1176, 1201, 1368, 1541 and 1603 These Raman lines were attributed to vibrational modes of C-H bending in benzene ring, C-N stretching, semi-quinoid”
Baibarac 等 - 2019 - Adsorption of 1,4-phenylene diisothiocyanate onto DOI: 10.1038/s41598-019-48314-x -
2986 cm⁻¹ Vertrauen 1,0
“groups at 2986 The -NH peak (1586-1611 cm-1) is observed in the L-glutamic acid 2”
Bakan 等 - 2020 - Synthesis, characterization and toxicity assessmen DOI: 10.1002/bip.21333
Sehen Sie Secondary amine in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.