Chlorine — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Chlorine tendenziell absorbiert. Sie wurden aus veröffentlichter Literatur zusammengestellt und nach der unterstützenden Evidenz geordnet. Jede Zuordnung ist bis zu einer Quelle (DOI) rückverfolgbar und wurde anhand unserer 320,000+ Referenzspektren und unseres Wissensgraphen kreuzvalidiert.
Gestützt durch 8 zitierte Quellen
Schnelle Antwort
Chlorine wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Chlorine
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 827 | 3 | 3 | 1,0 |
| 682 | 3 | 3 | 1,0 |
| 745 | 3 | 3 | 1,0 |
| 800 | 3 | 3 | 1,0 |
| 690 | 3 | 3 | 1,0 |
| 874 | 3 | 3 | 1,0 |
| 720 | 3 | 3 | 1,0 |
| 600 | 3 | 2 | 1,0 |
| 830 | 2 | 2 | 1,0 |
| 633 | 2 | 2 | 1,0 |
| 550 | 2 | 2 | 1,0 |
| 826 | 2 | 2 | 1,0 |
| 753 | 2 | 2 | 1,0 |
| 1250 | 2 | 2 | 1,0 |
| 771 | 2 | 2 | 1,0 |
| 588 | 2 | 2 | 1,0 |
| 850 | 2 | 2 | 1,0 |
| 639 | 2 | 2 | 1,0 |
| 635 | 2 | 2 | 1,0 |
| 760 | 2 | 2 | 1,0 |
| 640 | 2 | 2 | 1,0 |
| 834 | 2 | 2 | 1,0 |
| 3000 | 2 | 2 | 1,0 |
| 959 | 2 | 2 | 1,0 |
| 1050 | 2 | 1 | 1,0 |
| 1323 | 2 | 1 | 1,0 |
| 864 | 2 | 1 | 1,0 |
| 650 | 2 | 1 | 1,0 |
| 615 | 2 | 1 | 1,0 |
| 613 | 1 | 1 | 1,0 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 171 für Chlorine an.
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
720 cm⁻¹ Vertrauen 1,0
“The peaks appearing near 720 corresponds to the C-Cl stretching mode and at a cm-1assigned 1048 to (C-O-C) stretching mode of PVC [44].”
Arya 等 - 2018 - Effect of variation of different nanofillers on st DOI: 10.1007/s11581-016-1784 -
720 cm⁻¹ Vertrauen 1,0
“The peaks appearing near 720 corresponds to the C-Cl cm-1 stretching mode and at 1060 assigned to (C-C) stretching mode of PVC.”
Arya 和 Sharma - 2018 - Structural, microstructural and electrochemical pr DOI: 10.1007/s11581-017-2364-7 -
2013 cm⁻¹ Vertrauen 1,0
“615cm21 important bands are those located at 1588, 1449, 1365, and due to C55C N-C55O stretching in chloroalkenes, pseudosymmetric stretching, respectively.[30] ring stretching in benzene and C-Cl stretching, 2013 June”
Vibrational Spectrometry Strategies for Quality Control of Procymidone in Pesticide Formulations DOI: 10.1080/00387010500315843 -
822 cm⁻¹ Vertrauen 1,0
“Larvicidal Property of Green Synthesized Silver Nanoparticles against Vector Mosquitoes 5 cm(cid:1)1), production would be an appropriate for extending the biologstretching 1388.16 aliphatic amine group (C-N stretchcm(cid:1)1), ical route f”
Larvicidal property of green synthesized silver nanoparticles against vector mosquitoes (Anopheles stephensi and Aedes aegypti) DOI: 10.1016/j.jksus.2015.10.006 -
1328 cm⁻¹ Vertrauen 1,0
“-1 corresponding to vibration bands of CS-nZVI in the range of 40 0 - 40 0 0 cm .The broad and intense -1 -1 -H peak around 3394 cm correspond to the presence of O stretching from alcohol, 1632 cm is -1 -O -H attributed to H bending, the pe”
Bottom-up approach synthesis of core-shell nanoscale zerovalent iron (CS-nZVI): Physicochemical and spectroscopic characterization with Cu(II) ions adsorption application DOI: 10.1016/j.mex.2020.100976 -
3362 cm⁻¹ Vertrauen 1,0
“A sharp peak at 802 cm-1 that H stretching vibrations peak was found at 3362 that belongs to the peak of C-Cl stretching.”
Physicochemical Characterization and Controlled Release Formulation on Intercalated 2-Methyl-4-chlorophenoxy Acetic Acid-Graphite Oxide (MCPA-GO) Nanocomposite DOI: 10.22146/ijc.40921 -
1157 cm⁻¹ Vertrauen 1,0
“Furthermore, the addition of POM cm-1 into PVA-GA induces a slight increase in peak intensity at 1083 corresponds to C-O-C stretching cm-1 cm-1 vibration and new peaks at 1157 and 775 indicate the existence of -CN and -C-Cl stretching vibra”
Poly (vinyl alcohol)/glutaraldehyde/Premna oblongifolia merr extract hydrogel for controlled-release and water absorption application DOI: 10.1088/1757-899X/509/1/012048 -
663 cm⁻¹ Vertrauen 1,0
“Peak at 663 Tensile tests were performed according to ASTM D638 corresponds to the C-Cl stretching in PVC chains.”
A study of poly vinyl chloride / poly(butylene adipate-co-terephthalate) blends DOI: 10.1007/s10965-010-9486-1
Sehen Sie Chlorine in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.
