Ammonium — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Ammonium tendenziell absorbiert, zusammengestellt aus veröffentlichter Literatur und nach unterstützenden Belegen geordnet. Jede Zuordnung ist auf eine Quelle (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Ammonium wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Ammonium
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 400 | 4 | 4 | 1,0 |
| 1435 | 4 | 3 | 1,0 |
| 402 | 3 | 3 | 1,0 |
| 965 | 3 | 3 | 1,0 |
| 930 | 3 | 3 | 1,0 |
| 1625 | 2 | 2 | 1,0 |
| 1660 | 2 | 2 | 1,0 |
| 1680 | 2 | 2 | 1,0 |
| 1400 | 2 | 2 | 1,0 |
| 3200 | 2 | 2 | 1,0 |
| 3271 | 2 | 2 | 1,0 |
| 1450 | 2 | 2 | 1,0 |
| 1510 | 2 | 2 | 1,0 |
| 3040 | 2 | 1 | 1,0 |
| 966 | 2 | 1 | 1,0 |
| 1313 | 1 | 1 | 1,0 |
| 1605 | 1 | 1 | 1,0 |
| 450 | 1 | 1 | 1,0 |
| 1248 | 1 | 1 | 1,0 |
| 1265 | 1 | 1 | 1,0 |
| 1401 | 1 | 1 | 1,0 |
| 1148 | 1 | 1 | 1,0 |
| 2342 | 1 | 1 | 1,0 |
| 2363 | 1 | 1 | 1,0 |
| 1470 | 1 | 1 | 1,0 |
| 700 | 1 | 1 | 1,0 |
| 1730 | 1 | 1 | 1,0 |
| 3400 | 1 | 1 | 1,0 |
| 2970 | 1 | 1 | 1,0 |
| 1579 | 1 | 1 | 1,0 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 132 für Ammonium an.
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
3302 cm⁻¹ Vertrauen 1,0
“Amongst the gelatin the amide A group was recorded at 3304, 3291, 3292, and 3302 cm-1 for PG-FG 100-0, PGfilms, FG showed the lowest peak amide B wave number, indicating the single bond NH3 FG 50-50, PG-FG 0-100, and BG, respectively, which”
Application of Poultry Gelatin to Enhance the Physicochemical, Mechanical, and Rheological Properties of Fish Gelatin as Alternative Mammalian Gelatin Films for Food Packaging DOI: 10.3390/foods12030670 -
1660 cm⁻¹ Vertrauen 1,0
“cm-1is (cid:3) at 1435 assigned to the 4(F) bending mode of Brönsted acid (cid:3) bound ammonium ions [49,51,53], but the corresponding sites 2 cm-1 (E) vibration mode is absent at 1660 [59].”
Low-temperature selective catalytic reduction of NO with NH3 over V/ZrO2 prepared by flame-assisted spray pyrolysis: Structural and catalytic properties DOI: 10.1016/j.apcatb.2012.08.012 -
1572 cm⁻¹ Vertrauen 1,0
“The intense absorption 3 cm-1 cm-1 bands at 1572 and 823 are due to the asymmetric deformation and rocking NH+ cm-1 vibrations of 3.”
Crystal Growth, Spectral, Optical, Laser damage, Photoconductivity and Dielectric Properties of Semiorganic L-cystine hydrochloride Single Crystal DOI: 10.1016/j.saa.2015.06.113 -
402 cm⁻¹ Vertrauen 1,0
“The ESCA spectrum of treated PET revealed that the surface chemistry obtained after plasma polymerizing TFE was one clearly dominated by CF and CF moieties, 2 asdemonstratedbythelargepeaksappearingat291.1and289.5eV,respectively.Asexpected,s”
Cohn 和 Stern - 2000 - Sequential surface derivatization of PET films DOI: 10.1021/ma9900784 -
3000 cm⁻¹ Vertrauen 1,0
“The When hBN is decomposed into boric acid and cm-1 3000 peak is assigned to hydrogen bonding of B 2O species 3 ammonia, the boric acid could dehydrate on the cm-1 with the OH groups [21].”
Garro Mena 和 Hohn - 2021 - Modification of hexagonal boron nitride by thermal DOI: 10.1007/s10853-020-05719-8 -
2847 cm⁻¹ Vertrauen 1,0
“The analysis of structural changes conducted by XRD analysis showed the peak shifting from cm-1 19.89° to 16.1° and specific peak spectra FTIR of 2846.93 due to increase basal spacing from ammonium intercalation.”
Hakim 等 - 2023 - Ammonium-Assisted Intercalation of Java Bentonite DOI: 10.12911/22998993/156665 -
3416 cm⁻¹ Vertrauen 1,0
“actiontocupricionsinsolutions, InFigure 4a,thesodium the adsorption band of the S-H and N-H groups in ammonium sulfide during the (NH4)2S cm-1, sulfide FTIR spectrum revealed one adsorption band at 3416 which corresponded reaction to cupric”
Ibrahim 等 - 2022 - Effect of Ammonium Sulfide on Sulfidization Flotat DOI: 10.3390/min12101193 -
3250 cm⁻¹ Vertrauen 1,0
“The N-H stretch feature is located at cm(cid:4)1 cm(cid:4)1, (cid:2)2840 3250 on one hand and the N-H stretch peaks at 3250and is assigned to the symmetric stretching of NH 3 cm(cid:4)1 3200 on the other hand is expected to be much lower th”
Leewis 等 - 2006 - Ammonia adsorption and decomposition on silica sup DOI: 10.1016/j.apsusc.2005.12.115
Sehen Sie Ammonium in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.