Was absorbiert bei 1743 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1743 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1743 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbonyl (C=O) | 55 | 48 | 1,0 |
| Ester | 40 | 39 | 1,0 |
| Methacrylate | 34 | 34 | 1,0 |
| Acetate | 34 | 34 | 1,0 |
| Carboxyl (COOH) | 33 | 33 | 1,0 |
| Amide | 31 | 31 | 1,0 |
| Ketone | 28 | 28 | 1,0 |
| Fatty acid | 9 | 9 | 1,0 |
| Alkyl C-H | 9 | 9 | 1,0 |
| C-O single bond | 7 | 7 | 1,0 |
| Methoxy (OCH3) | 7 | 7 | 1,0 |
| Lipid | 5 | 5 | 1,0 |
| C c single bond | 3 | 3 | 1,0 |
| Methyl | 2 | 2 | 1,0 |
| Aldehyde (CHO) | 1 | 1 | 1,0 |
| Protein | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Triglyceride | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| N h | 1 | 1 | 0,8 |
| Phospholipid | 1 | 1 | 0,7 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| PMMA | 1743, 1722, 1383 | Methacrylate, Acetate, Carbonyl (C=O) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1743 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The amplitude of the 1743 band corresponds to The Oxygen Reaction in Cytochrome Oxidase Biochemistry, Vol.”
Gorbikova 等 - 2007 - Time-resolved ATR-FTIR spectroscopy of the oxygen DOI: 10.1021/bi701614w -
Alkyl C-H Vertrauen 1,0
“a small peak at 2921.63 in both the films showed good C-H stretch, while a sharp peak cm-1 at 1743.3 in PAV indicated triglyceride ester linkage cm-1,1362.46 cm-1 [11];”
Synthesis and characterization of eco-friendly bioplastic from low-cost plant resources DOI: 10.1007/s42452-019-1460-x -
Acetate Vertrauen 1,0
“1 C=O stretching vibration 1743 University, 2011.”
Kumar 和 Sidhu - 2013 - Synthesis and Characterization of PMMA-ZrO2 Nanoco DOI: 10.1063/1.4810163 -
Acetate Vertrauen 1,0
“For ginger EO, the strong and sharp absorption peak at 1743 the cm(cid:0) cm(cid:0) C-- 1 1 C-O and the absorption peak at 721 were assigned to O stretching vibration peak, stretching absorption peak at 1154 vibration peak and the deformati”
Microencapsulation of ginger-based essential oil (Zingiber cassumunar roxb) with chitosan and oil palm trunk waste fiber prepared by spray-drying method DOI: 10.1016/j.csite.2020.100606 -
Acetate Vertrauen 1,0
“(\CH ferentfromthoseofPOoo.Informationonthephysicalcharacteristicsof asymmetrical stretch), 2922 and 2853 (symmetrical and asym3 \CH2), (\C_O \C_C thedifferentblends,suchasthesolidfatcontentandmeltingandcrysmetrical stretching of 1743 stret”
Ng 等 - 2014 - Compositional and thermal characteristics of palm DOI: 10.1016/j.foodres.2013.10.035 -
Carbonyl (C=O) Vertrauen 1,0
“Compared with P, the spectra of the EP showed the appearance of cm-1, cm-1,1408 cm-1, 1598 which were represented C=O stretching vibration, strong bands at 1743 C=O asymmetric stretching vibration and O-H deformation vibration respectively.”
Ouyang 等 - 2012 - Adsorption of Cu (II) from aqueous single metal so DOI: 10.4028/www.scientific.net/AMR.535-537.1601 -
Acetate Vertrauen 1,0
“The weak bands at 1747,1666 and medium band at 1658 due to C= O stretch in parent coir have only shifted C=O stretch to medium band at 1743 and C cm-1 1750 in BA-Coir/(Py-Acetone) and Coir-BA(Py-Acetone)-C-BPO respectively;”
Rout 等 - 2017 - A green approach to produce silver nano particles DOI: 10.1016/j.surfin.2017.03.004 -
Amide Vertrauen 1,0
“cm-1), (1547-1548 peaks the tyrosine peak (1516 the Karolinska cm-1), CvO C-N lipid ester stretching peak (1743 and the cm-1) (1573-1574 adenine peak (Table 1).”
Shi 等 - 2018 - Biochemical alterations of Candida albicans during DOI: 10.1039/c8an01452c
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.