Was absorbiert bei 1711 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1711 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1711 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbonyl (C=O) | 21 | 20 | 1,0 |
| Methacrylate | 15 | 14 | 1,0 |
| Acetate | 15 | 14 | 1,0 |
| Carboxyl (COOH) | 14 | 13 | 1,0 |
| Amide | 11 | 10 | 1,0 |
| Ester | 9 | 8 | 1,0 |
| Ketone | 8 | 7 | 1,0 |
| Methoxy (OCH3) | 7 | 7 | 1,0 |
| C-O single bond | 6 | 6 | 1,0 |
| Fatty acid | 3 | 3 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| Ring structure | 3 | 2 | 1,0 |
| Aromatic ring | 2 | 1 | 1,0 |
| Hydroxyl (O-H) | 2 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| Protein random coil | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Thiol | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Carbonate | 1 | 0 | 1,0 |
| Silicon (Si) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polystyrene | 1711, 1020, 1600 | Methacrylate, Acetate, Carbonyl (C=O) | 1 |
| PMMA | 1711, 1722, 1383 | Methacrylate, Acetate, Carbonyl (C=O) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1711 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbonyl (C=O) Vertrauen 1,0
“In addition feasible by IR, for example when assessing the carbonyl stretch at 1711 (1), 1693 (2) and 1688 (3) m/z to the expected iminium base peak at 58, EI-MS displayed key ions at 173, 145, 125, 95, and 75.”
Analytical characterization of three trifluoromethylsubstituted methcathinone isomers DOI: 10.1002/dta.382 -
Alkyl C-H Vertrauen 1,0
“[28] established a linear equation for (=C-H), cm-1 bands of virgin olive oil were seen at 1267 deformation in unconjugated cis double FFA determination in rapeseed and coconut oil by using the band of the FTIR spectra at 1711 cm-1 (C=C), c”
Monitoring Enzymatic Hydroesterification of Low-Cost Feedstocks by Fourier Transform InfraRed Spectroscopy DOI: 10.3390/catal9060535 -
Carboxyl (COOH) Vertrauen 1,0
“The deconvolution of the carFrom the above discussion, it is clear that the cm(cid:3)1 bonyl band shows splitting of the peak into two peaks, peaks at 1711 and 1747 are due to the carboxylic cm(cid:3)1 cm(cid:3)1 cm(cid:3)1 one at 1736 comp”
Galgali 等 - 2007 - Sugar-linked biodegradable polymers Regio-specifi DOI: 10.1016/j.carbpol.2006.06.035 -
Acetate Vertrauen 1,0
“1493.77 1487.98 C-H ring bend, O-CH 3 stretch 1710.74 1730.03”
Ganesan 等 - 2018 - The effect of titanium dioxide nano-filler on the DOI: 10.1007/s10854-018-8815-8 -
Carbonyl (C=O) Vertrauen 1,0
“The EC-C spectrum showed a carbonyl stretch cm-1 peak at 1711 in resin coat, while an aromatic ring of benzene (C=C) was present in”
Structural, Physical, and Mechanical Analysis of ZnO and TiO2 Nanoparticle-Reinforced Self-Adhesive Coating Restorative Material DOI: 10.3390/ma14247507 -
Ester Vertrauen 1,0
“Spectrum of TAX cc cm-1 shows prominent peaks at 1711,2516 and 1031 which is assigned to Ester (C = O) linkage, A -SH stretching and C-O-C bond.”
Ijaz 等 - 2019 - Thiolation of arabinoxylan and its application in DOI: 10.1080/03639045.2019.1569041 -
Carbonyl (C=O) Vertrauen 1,0
“For the ester carbonyl funccm-1 178.11 ppm refer to the carbon atom of the carbonyl tional groups C=O of HYOOA at 1741 and the carcm-1, group (carboxylic acid) for MEOA and HYOOA, reboxylic carbonyl vibration functional group at 1711”
Salimon 等 - 2013 - Synthesis and optimization ring opening of monoepo DOI: 10.1186/2193-1801-2-429 -
Acetate Vertrauen 1,0
“cm-1, PVAM-g-GT 1 h, the showed the peak for C=O stretching at 1643 N-H cm-1, cm-1 bending at 1543 C=O and C-O stretching at 1711 and 1227 that were assigned to the presence of carboxylic groups in the chemical structure.”
Green robust pH–temperature-sensitive maleated poly(vinyl alcohol)-g-gelatin for encapsulated capsaicin DOI: 10.1007/s00289-016-1609-3
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.