Was absorbiert bei 1370 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1370 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1370 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 47 | 45 | 1,0 |
| Methacrylate | 20 | 19 | 1,0 |
| Acetate | 20 | 19 | 1,0 |
| Amide | 18 | 18 | 1,0 |
| Methoxy (OCH3) | 16 | 15 | 1,0 |
| C-O single bond | 14 | 13 | 1,0 |
| Carbohydrate | 12 | 12 | 1,0 |
| Hydroxyl (O-H) | 11 | 10 | 1,0 |
| Secondary amine | 9 | 9 | 1,0 |
| C n single bond | 9 | 9 | 1,0 |
| Carboxyl (COOH) | 6 | 6 | 1,0 |
| Carbonyl (C=O) | 6 | 6 | 1,0 |
| Ketone | 5 | 5 | 1,0 |
| Ester | 5 | 5 | 1,0 |
| Methyl | 4 | 4 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Carbonate | 3 | 3 | 1,0 |
| Lignin | 3 | 3 | 1,0 |
| Water (H2O) | 2 | 2 | 1,0 |
| Lipid | 2 | 2 | 1,0 |
| Protein | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Alkene (C=C) | 2 | 1 | 1,0 |
| Boron nitrogen | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Nitrate | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 0 | 1,0 |
| Silicon (Si) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Chitosan | 1370, 1650, 1655 | Alkyl C-H, Amide, Acetate | 1 |
| Cellulose | 1370, 1735, 1650 | Alkyl C-H, Acetate, Methacrylate | 1 |
| SiO2 | 1370, 1739, 699 | Alkyl C-H | 1 |
| polyaniline | 1370, 1565, 1570 | Amide, Alkyl C-H, Methacrylate | 1 |
| Polyvinyl Alcohol | 1370, 1141, 1640 | Alkyl C-H, Methacrylate, Acetate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1370 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbohydrate Vertrauen 1,0
“microfibrils.Thepreferred pulpcharacteristicsfor paper productionare Moreover, the characteristic bands for amorphous cellulose at the presence of long fibres with a large diameter that provide me897cm-1, 1273cm-1, 1370cm-1 1430cm-1 and in”
Exploring the lignolytic potential of a new laccase producing strain Kocuria sp. PBS-1 and its application in bamboo pulp bleaching DOI: 10.1016/j.ibiod.2019.104726 -
Alkyl C-H Vertrauen 1,0
“polysaccharide band, and the CH band at 1370 Th e PCA results show that the clay and light fraction spectra changed during laboratory incubation (Fig.”
Calderon 等 - 2011 - Chemical Differences in Soil Organic Matter Fracti DOI: 10.2136/sssaj2009.0375 -
Amide Vertrauen 1,0
“A second amide vibration cm-1 cm-1 appeared at 1420 (C-H stretch), and an amide peak appeared at 1370 (C-H cm-1 stretch).”
Classification and identification of Rhodobryum roseum Limpr. and its adulterants based on fourier-transform infrared spectroscopy (FTIR) and chemometrics DOI: 10.1371/journal.pone.0172359 -
Alkyl C-H Vertrauen 1,0
“zinc ions, confirmed also by the percentage removal of The peaks at 1370 and cm-1 around 1230 can be due to symmetric vibrations of -CH and of C-O single bond 3”
Study of Polyvinyl Alcohol-SiO2 Nanoparticles Polymeric Membrane in Wastewater Treatment Containing Zinc Ions DOI: 10.3390/polym13111875 -
C-O single bond Vertrauen 1,0
“vera, with the FTIR revealing peaks at 1739.94 cm (C O stretching vibration), 1370 = -1 1H (deformation of the H-C-OH bonds), and 1370 cm (C-O-C asymmetric stretching vibration);”
Chou 等 - 2023 - Potential of methacrylated acemannan for exerting DOI: 10.1186/s12906-023-04022-8 -
Alkyl C-H Vertrauen 1,0
“Furthermore, the amide characteristic bands were clearly clearly visible at υ = 1655 and 1604 cm-1 in the spectrum, whereas the CH bands throughcm-1 υ visible at = 1655 and 1604 in the spectrum, whereas the CH bands throughout the CS out th”
Chitosan Capped Copper Oxide Nanocomposite: Efficient, Recyclable, Heterogeneous Base Catalyst for Synthesis of Nitroolefins DOI: 10.3390/catal12090964 -
Vertrauen 1,0
“vibration stretching appears at 1370 and 1010 The function groups related to the cm-1, PANI are located at 3401, 2918, 1105 for N-H, C-H, C-N aromatic, respectively.”
Conversion of Sewage Water into H2 Gas Fuel Using Hexagonal Nanosheets of the Polyaniline-Assisted Deposition of PbI2 as a Nanocomposite Photocathode with the Theoretical Qualitative Ab-Initio Calculation of the H2O Splitting DOI: 10.3390/polym14112148 -
Carbohydrate Vertrauen 1,0
“cm-1 that the peak around wavelength 1370 appeared This result is in agreement with and analysis FTIR XRD due to modified cellulose, the peak refers to EFB C-H 2327”
Jahi 等 - 2020 - Empty Fruit Bunch Cellulose based Sorbent for Oil DOI: 10.17576/jsm-2020-4909-29
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.