Was absorbiert bei 1229 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1229 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1229 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 9 | 9 | 1,0 |
| Methacrylate | 9 | 9 | 1,0 |
| Acetate | 9 | 9 | 1,0 |
| Methoxy (OCH3) | 8 | 8 | 1,0 |
| Amide | 4 | 4 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Bromine | 1 | 1 | 1,0 |
| Carbon bromine | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Urethane | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| alginate | 1229, 1100, 1715 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1229 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“of peak changes in wavenumber for alginate-GA in BBPEs system (cm-1) Assignments (functional group) Wavenumber GA ALGAALGAALGAALGAALGAALGAALGA0 1 2 3 4 5 6 - C-O-C 1025 1030 1031 1035 1035 1080 1081 stretching - - - - - - - 1074 C-O stretch”
Enhancing proton conductivity of sodium alginate doped with glycolic acid in bio-based polymer electrolytes system DOI: 10.1007/s10965-020-02142-0 -
Acetate Vertrauen 1,0
“Meanwhile, the peaks at 1229 and 1070 are assigned to C-O and C-O-C stretching vibrations cm-1 from urethane carbonyl.”
Preparation of one-shot and two-shot method of semi-rigid polyurethane film based on functionalized liquid natural rubber DOI: 10.1063/1.5047200 -
Acetate Vertrauen 1,0
“The bands at 1229 and cm-1 samples was examined immediately after the sam1062 are assigned to C-O and C-O-C stretching ples were removed from the media before they were vibrations from urethane carbonyl [9].”
The behavior of semi-rigid polyurethane film based on functionalized rubber by one-shot and two-shot method preparation DOI: 10.1007/s10853-018-2578-8 -
Carboxyl (COOH) Vertrauen 1,0
“The degree of stretching vibration mode of the carboxylic group (C-O) corresponding to the peaks at 1229, 1217, 1215, 1073, cm-1 1071 and 1068 of all as-burnt BCZT powders decreased with increasing pH value.”
Influence of pH values on the surface and properties of BCZT nanopowders synthesized via sol-gel auto-combustion method DOI: 10.1016/j.surfcoat.2016.03.091 -
C-O single bond Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Graphene oxide-TiO2 and reduced graphene oxide-TiO2 nanocomposites: Insight in charge-carrier lifetime measurements DOI: 10.1016/j.cattod.2016.11.008 -
Vertrauen 1,0
“cm(cid:0) C-- 1, 8400 automatic nitrogen determination apparatus (FOSS, Hiller, which correspond to the O stretching vibra1229, and 1059 C(cid:0) (cid:0) (cid:0) C(cid:0) O(cid:0) Denmark) in the Kjeldahl mode.”
Preparation of pH-sensitive polylactic acid-naringin coaxial electrospun fiber membranes for maintaining and monitoring salmon freshness DOI: 10.1016/j.ijbiomac.2021.08.087 -
Acetate Vertrauen 1,0
“hydrogen bonded hydroxyl groups (3600-3200 cm-1 The standard has a very strong band at 1737 that is assigned to C=O cm-1 that corresponds to in-plane stretching of COOH group and a band at 1229 bending vibrations of OH groups from COOH (Fig”
Miletic 等 - 2020 - Oxidized humic acids from the soil of heat power p DOI: 10.2298/JSC190726099M -
Amide Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Direct Quantification of Drug Loading Content in Polymeric Nanoparticles by Infrared Spectroscopy DOI: 10.3390/pharmaceutics12100912
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.