Was absorbiert bei 1220 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1220 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1220 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methacrylate | 21 | 19 | 1,0 |
| Acetate | 21 | 19 | 1,0 |
| Methoxy (OCH3) | 20 | 18 | 1,0 |
| C-O single bond | 20 | 18 | 1,0 |
| Amide | 9 | 8 | 1,0 |
| Alkyl C-H | 8 | 6 | 1,0 |
| Lignin | 6 | 6 | 1,0 |
| Phosphate (PO4) | 5 | 4 | 1,0 |
| Hydroxyl (O-H) | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 4 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Silicon (Si) | 3 | 2 | 1,0 |
| C c single bond | 3 | 2 | 1,0 |
| Ester | 3 | 2 | 1,0 |
| Phosphorus | 3 | 2 | 1,0 |
| Carbonyl (C=O) | 3 | 1 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Sulfate (SO4) | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| S eq o | 2 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Anhydride | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Styrene | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 0,95 |
| Methyl | 1 | 0 | 1,0 |
| Alkene (C=C) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polystyrene | 1220, 1020, 1600 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| LDPE | 1220, 1720, 1737 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| Polyaniline | 1220, 1565, 1570 | Methacrylate, Acetate | 1 |
| lignin | 1220, 1035, 1510 | Methacrylate, Acetate, C-O single bond | 1 |
| wood | 1220, 1740, 1730 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1220 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“The to 1600 acyl groups, C-O (peak at 1220 and cm-1) = bacteria used LDPE as their source of carbon and made the carbonyl groups, C O (peak near 1720 was mainly necessary changes incorporating the functional groups to modify found.”
Biodegradation of Unpretreated Low-Density Polyethylene (LDPE) by Stenotrophomonas sp. and Achromobacter sp., Isolated From Waste Dumpsite and Drilling Fluid DOI: 10.3389/fmicb.2020.603210 -
Styrene Vertrauen 1,0
“The genband at 1220 which is attributed to a five membered eral procedure for esterification of poly(styrene maleic cyclic anhydride (Bellamy, 1975).”
Galgali 等 - 2007 - Sugar-linked biodegradable polymers Regio-specifi DOI: 10.1016/j.carbpol.2006.06.035 -
Vertrauen 1,0
“The results of this cm-1 band at 1220 is ascribed to the disappearance of amine stretchexperiment are shown in Fig.”
Revisiting the Redox Transitions of Polyaniline. Semiquantitative Interpretation of Electrochemically Induced IR Bands DOI: 10.1016/j.jelechem.2021.115593 -
Amide Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Dual delivery of platelet‐derived growth factor and bone morphogenetic factor‐6 on titanium surface to enhance the early period of implant osseointegration DOI: 10.1111/jre.12756 -
Ester Vertrauen 1,0
“In addition, cm-1 samples show a peak at 1220 corresponding to the ester sulfate groups, and at 1670 due to the carbonyl group contained in D-galactose.”
Preparation and Characterization of Super-Absorbing Gel Formulated from -Carrageenan–Potato Peel Starch Blended Polymers DOI: 10.3390/polym13244308 -
Lignin Vertrauen 1,0
“well-resolved lignin bands at 1220 and 1140 develop and 1330 They concluded that the best calibration Et in decayed Scots pine.”
Pandey 和 Pitman - 2003 - FTIR studies of the changes in wood chemistry foll DOI: 10.1016/S0964-8305(03)00052-0 -
Acetate Vertrauen 1,0
“cm(cid:3)1 (CH rockteristics of vibration peaks at 835 and 930 electrodes.22 2 It is also noticed that the semicircular portion cm(cid:3)1 cm(cid:3)1 (C-O-C stretching), 1220 and 1250 ing), 1116 is reduced and almost disappeared for plastic”
Influence of high and low dielectric constant plasticizers on the ion transport properties of PEO: NH4HF2 polymer electrolytes DOI: 10.1177/0954008319894043 -
Water (H2O) Vertrauen 1,0
“Deconvoluted 1120cm-1 δ(H spectral bands between 1220 and of the salted and plas2O) vibrational bands due to adsorbed water around 3800 to 3200cm-1”
Characteristics of PEMA/PVdF-HFP blend polymeric gel films incorporated with lithium triflate salt in electrochromic device DOI: 10.1016/j.ssi.2011.11.035
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.