Was absorbiert bei 1114 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1114 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1114 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methacrylate | 16 | 14 | 1,0 |
| C-O single bond | 16 | 14 | 1,0 |
| Acetate | 16 | 14 | 1,0 |
| Methoxy (OCH3) | 15 | 13 | 1,0 |
| Alkyl C-H | 7 | 7 | 1,0 |
| Silicon-oxygen (Si-O) | 5 | 5 | 1,0 |
| Amide | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Nucleic acid | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Sulfonate | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Metal hydroxyl | 1 | 1 | 1,0 |
| Thiocarbonyl | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 0,9 |
| Lignin | 1 | 1 | 0,9 |
| Nitrogen heterocycle | 1 | 1 | 0,9 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Chitosan | 1114, 1650, 1655 | Acetate, Methacrylate, C-O single bond | 2 |
| zinc oxide | 1114, 1627, 1638 | Methacrylate, Acetate, C-O single bond | 1 |
| CdS | 1114, 1375, 1092 | Methoxy (OCH3), Methacrylate, C-O single bond | 1 |
| zinc oxide nanoparticles | 1114, 1744, 1627 | Acetate, Methacrylate, Methoxy (OCH3) | 1 |
| cotton | 1114, 1030, 1638 | Methacrylate, Acetate, C-O single bond | 1 |
| chitin | 1114, 1650, 1655 | Methacrylate, Acetate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1114 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“The band present at 1114 is due to the (C-O) stretching vibrations which corresponds to cm-1 the secondary alcohol.”
Dhayalan 等 - 2021 - Eco friendly synthesis and characterization of zin DOI: 10.1515/nanofab-2020-0104 -
Ring structure Vertrauen 1,0
“cm-1 cm-1 1256 (C-H bending and CH symmetrical deformation), 1069 (asymmetric 3 cm-1 in-phase ring-stretching mode), 1023 (C-O-C asymmetric in-phase ring-stretching), 1159cm-1 1114cm-1”
Antimicrobial Activity of Chemically and Biologically Treated Chitosan Prepared from Black Soldier Fly (Hermetia illucens) Pupal Shell Waste DOI: 10.3390/microorganisms9122417 -
Vertrauen 1,0
“The powder X-ray diffraction Accepted 18 November 2008 Available online 24 November 2008 cm-1and cm-1region,besides 617 (FTIR) spectrum showscharacteristic bands duetothe sulfate ion in1114 bands due to the amine moiety.”
Nagaraju 等 - 2009 - A facile low temperature hydrothermal route to CdS DOI: 10.1016/j.matlet.2008.11.032 -
Vertrauen 1,0
“The internal asymmetric stretching vibration and external symmetric Si-O-T stretching of linkage were evidenced from the cm(cid:1)1, absorption bands at around 1114 and 797 respeccm(cid:1)1 tively.15 The characteristic bands of 549 and 1226”
Synthesis of ZSM5 Zeolite Particles Using Triethanol Amine as StructureDirecting Agent DOI: 10.1111/j.1551-2916.2011.05006.x -
Vertrauen 1,0
“N-H C-N (coupled mode of bending and stretching cm-1 of a negative band at 1114 to a lower frequency by 7 vibrations) of backbone amides (22).”
Noguchi 等 - 1999 - Structure of a histidine ligand in the photosynthe DOI: 10.1021/bi990631 -
Alkyl C-H Vertrauen 1,0
“cm-1, At peak 1114 the major increase in the FTIR spectra of dried, dyed, and smoked specimens was attributed to the C-H functional group in guaiacyl and syringyl (lignin) [22].”
Investigating the Effect of Smoke Treatment on Hygroscopic Characteristics of Bamboo by FTIR and Raman Spectroscopy DOI: 10.3390/ma15041544 -
Acetate Vertrauen 1,0
“The absorption bands at 1114 cm-1 (C-O stretching) and 1628 and 1457 (C=O of amide I and II) β-CD-CS.”
Singh 等 - 2017 - Sustainable fragrance cum antimicrobial finishing DOI: 10.1016/j.scp.2017.01.003 -
Amide Vertrauen 1,0
“Spectra cm‾1 for FeS-isoprop-DTC shows a medium peak at 2926 that is related to the C-H stretch in cm‾1 addition to another medium peak at 1114 corresponding to C-N stretch.”
Siraj 等 - 2020 - Synthesis, characterization and electrochemical in DOI: 10.1016/j.mee.2020.111400
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.