Was absorbiert bei 453 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 453 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 453 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 6 | 6 | 1,0 |
| Hydroxyl (O-H) | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Metal sulfur | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| S s | 1 | 1 | 0,8 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Chitosan | 453, 1650, 1655 | Hydroxyl (O-H) | 1 |
| CuO | 453, 1000, 505 | Metal oxygen, Hydroxyl (O-H), Carboxyl (COOH) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 453 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Amide Vertrauen 1,0
“The FTIR spectra of PANI shows the 3 cm-1 characteristics peaks at 453 and 498 due to C - N and C - H bending vibration the out of”
Antistatic and Dielectric properties of one-dimensional Al2+:Nd2O3 nanowire doped polyaniline nanocomposites for electronic application DOI: 10.1016/j.sna.2018.07.018 -
Metal sulfur Vertrauen 1,0
“An additional cm(cid:1)1 Mo-S appears at 1116.4 and the characteristics peaks of cm(cid:1)1, peak is observed at 453.35 which corresponds to the cm(cid:1)1 cm(cid:1)1.”
Verma 等 - 2021 - The functionalization of polyacrylamide with MoS2 DOI: 10.1039/d0se01877e -
Hydroxyl (O-H) Vertrauen 1,0
“However, the IR spectra of the sample collected from golf course area 2 (GCU2) show highest intensity in region cm-1 3500-3000 which representing the OH functional group, 3000-2800 corresponds to methylene C-H asymmetric 453 cm-1 stretching”
Abu Bakar 等 - 2014 - Metabolic Fingerprinting of Lichen Usnea baileyi b DOI: 10.1063/1.4895239 -
Acetate Vertrauen 1,0
“Therewere three drastic decrement intensity peaks of C=O, C-OH, and C-O groups with the generation of new peaks at 576 cm-1, 505 cm-1 and 453 cm-1 corresponding to CuO stretching vibrations, that were explained by Gulati et al.”
Effect of rGO wt.% on the Preparation of rGO/CuO Nanocomposites at Different Test Periods and Temperatures DOI: 10.3390/cryst12101325 -
Metal oxygen Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Dwivedi 等 - 2019 - Effect of Synthesis Techniques on the Optical Prop DOI: 10.1021/acsomega.8b03606 -
Hydroxyl (O-H) Vertrauen 1,0
“Fritsch et al.: OH stretching vibrations in serpentines 453 (wecm-1) (2v) Table 3.”
Fritsch 等 - 2021 - Structural, textural, and chemical controls on the DOI: 10.5194/ejm-33-447-2021 -
Silicon (Si) Vertrauen 1,0
“The strong bands at 992 cm-1and 453 cm-1 were caused by -XO4 and O-X-O groups, respectively (X means Si/Al), and the band at 3332 cm-1 corresponded to the Si-OH group and Al-OH group on the surface of zeolite molecular sieve framework [46].”
Chitosan Modified Zeolite Molecular Sieve Particles as a Filter for Ammonium Nitrogen Removal from Water DOI: 10.3390/ijms21072383 -
Metal oxygen Vertrauen 1,0
“cm-1, cm-1 The identified Cu-O peak locations were at 592, 607, and 665 cm-1, whereas 453 cm-1 was identified Cu-O peak locations were at 592, 607, and 665 whereas 453 was The identified Cu-O peak locations were at 592, 607, and 665 cm-1, w”
Novel Copper Oxide Bio-Nanocrystals to Target Outer Membrane Lectin of Vancomycin-Resistant Enterococcus faecium (VREfm): In Silico, Bioavailability, Antimicrobial, and Anticancer Potential DOI: 10.3390/molecules27227957
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.