Was absorbiert bei 1755 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1755 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1755 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbonyl (C=O) | 6 | 6 | 1,0 |
| Amide | 5 | 5 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| Ketone | 3 | 3 | 1,0 |
| Ester | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| N h | 2 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetyl | 1 | 1 | 0,95 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| cellulose acetate | 1755, 1650, 1741 | Acetate, Carbonyl (C=O), Methacrylate | 1 |
| poly(vinyl alcohol) | 1755, 1700, 2993 | Acetate, Methacrylate, Carbonyl (C=O) | 1 |
| CS | 1755, 1645, 1720 | Methacrylate, Acetate, Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1755 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“In the case of MGAJ cm-1, PLA, the presence of oligomer molecules was witnessed by the presence of a peak at 1755 which indicates about the presence of -C=O stretching vibration [9, 10].”
Ghosh 等 - 2020 - Blown films fabrication of poly lactic acid based DOI: 10.1016/j.mtcomm.2019.100737 -
Carbonyl (C=O) Vertrauen 1,0
“precursor (a: PVA, b: PVA-g-OOCO) Compared to the FTIR spectrum of PVA, an extra characteristic peak appears at cm-1 1755 on that of the product (Figure 2), which is assigned to the carbonyl groups of incorporated OOCO.”
Yang 和 Xiao - 2020 - A graft copolymer composed of continuously linked DOI: 10.1016/j.matlet.2020.128345 -
Amide Vertrauen 1,0
“amide vibrations at 1755 and 1712 The amide vibrations of the minor diradical species is Cu2+ slightly different from the diradical species characterized under non-catalytic conditions cm-1)”
Ligand Radical Mediated Water Oxidation by a Family of Copper o -Phenylene Bis-oxamidate Complexes DOI: 10.1021/acs.inorgchem.1c00546 -
Carbonyl (C=O) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Danciu 等 - 2015 - Preliminary In Vitro Evaluation of Genistein Chemo DOI: 10.1155/2015/262930 -
Acetate Vertrauen 1,0
“2021, 22, x FOR PEER REVIEW 7 of 23 cell wall carbohydrates, namely glucosamines (chitin and chitosan), glucans, and glucuronans: C-H stretching vibrations (C-H stretching in -CH3 and -CH2 at 2933, 2895, and 2885 cm-1), C=O stretching in es”
Assessment of Biotechnologically Important Filamentous Fungal Biomass by Fourier Transform Raman Spectroscopy DOI: 10.3390/ijms -
Carbonyl (C=O) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Synthesis and Characterization of Corn Stover-Based Cellulose Triacetate Catalyzed by Ionic Liquid Phosphotungstate DOI: 10.3390/ijms23126783 -
Vertrauen 1,0
“On the other hand, NO interacting with the OH Cu-OH+ (1898-1880cm-1).[16a,19] group of species is expected at lower frequencies In cm-1 the lower frequency region (1806-1780 cm-1), the IR band at 1755 is associated to Cu+”
Martinez-Franco 等 - 2014 - Synthesis, characterization and reactivity of high DOI: 10.1016/j.jcat.2014.03.018. -
Carbonyl (C=O) Vertrauen 1,0
“In addition, a 3 cm-1 cm-1 peak at 1755 corresponded to the carbonyl group (C=O), while the band at 1244 corresponded to the esters31.”
Improved anti-biofouling resistances using novel nanocelluloses/cellulose acetate extracted from rice straw based membranes for water desalination DOI: 10.1038/s41598-022-08324-8
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.