Was absorbiert bei 1671 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1671 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1671 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Amide | 7 | 5 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| Carbonyl (C=O) | 3 | 3 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 3 | 1 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Protein beta turn | 1 | 1 | 1,0 |
| Aldehyde (CHO) | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Protein beta sheet | 1 | 1 | 1,0 |
| Protein alpha helix | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Keratin | 1671, 1635, 1717 | Amide, Methacrylate, Acetate | 1 |
| polypropylene | 1671, 1030, 1600 | Methacrylate, Acetate, Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1671 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbohydrate Vertrauen 1,0
“SEM images are widely The peaks at 1671 and correspond to used to examine the surface morphology of polysaccharides the amide bonds and NH group, respectively.”
Almahamid 等 - 2022 - Application of Factorial Design and Response Surfa DOI: 10.1155/2022/1967606 -
Amide Vertrauen 1,0
“The two major peaks at 1671 and 1564 were C‚O assigned to the stretching (amide I) and NH bending”
Mechanochemical synthesis of chitosan submicron particles from the gladius of Todarodes pacificus DOI: 10.1016/j.jare.2016.08.006 -
Acetate Vertrauen 1,0
“ν(C=C) ν(C=O) 1653 0.3 0.1 + quinone C=O stretching in ν(C=C) ν(C=O) 1671 1.6 0.1 + quinone C=O stretching mode C=O COOH”
Water-Activated Semiquinone Formation and Carboxylic Acid Dissociation in Melanin Revealed by Infrared Spectroscopy DOI: 10.3390/polym13244403 -
Protein alpha helix Vertrauen 1,0
“and amide III are shown in The amide I band (1230-1330cm-1) α-helix β-sheet are both caused by the skeleton band The characteristic peaks of and structures are 1652cm-1 1671cm-1, and respectively (Rosana et al., 2012).”
Du 等 - 2022 - Green and Highly Efficient Wool Keratin Extraction DOI: 10.3389/fmats.2021.789081 -
Hydroxyl (O-H) Vertrauen 1,0
“The peak at 1671 was assigned to the first suffer The C vibrationsofunsaturatedaldehydestructures,andthesharppeak alcohol radical formed in the reaction can 8 cm-1”
Fu 等 - 2015 - Photosensitized Production of Atmospherically Reac DOI: 10.1021/jacs.5b04051 -
Amide Vertrauen 1,0
“For MP, the following vibration peaks are recognized, such as stretching vibration of -NH at 2 cm-1, cm-1, cm-1, 3+ 3393 stretching vibration of -NH at 3155 stretching vibration of C-N at 1671 and”
He 等 - 2019 - Novel Intumescent Flame Retardant Masterbatch Prep DOI: 10.3390/polym11010050 -
Acetate Vertrauen 1,0
“(cm-1) Frequency Band Assignment Species C-H 929 out-of-plane deformation 1018 Ring deformation 1081 Furfural 1156 =C-O-C= ring vibration 1279 1570 C=C stretches 1696 C=O aldehyde stretch 1671 C-O 1163 acid stretch vibration 1369 CH symmetr”
Solubility Temperature Dependence of Bio-Based Levulinic Acid, Furfural, and Hydroxymethylfurfural in Water, Nonpolar, Polar Aprotic and Protic Solvents DOI: 10.3390/pr9060924 -
Protein beta turn Vertrauen 1,0
“As displayed in we observed eight major absorptions for the pure PTyr-TPA: for the aromatic ring vibrations from Figure10A,weobservedeightmajorabsorptionsforthepurePTyr-TPA:forthearomaticringvibrations PTyr (1595 and 1612 cm-1), the α-helic”
Supramolecular Interactions Induce Unexpectedly Strong Emissions from Triphenylamine-Functionalized Polytyrosine Blended with Poly(4-vinylpyridine) DOI: 10.3390/polym9100503
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.