Was absorbiert bei 1656 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1656 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1656 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Amide | 47 | 41 | 1,0 |
| Carbonyl (C=O) | 15 | 11 | 1,0 |
| Carboxyl (COOH) | 11 | 8 | 1,0 |
| Methacrylate | 11 | 8 | 1,0 |
| Acetate | 11 | 8 | 1,0 |
| Ester | 10 | 7 | 1,0 |
| N h | 9 | 9 | 1,0 |
| Protein alpha helix | 9 | 8 | 1,0 |
| Ketone | 9 | 6 | 1,0 |
| Alkyl C-H | 6 | 6 | 1,0 |
| Hydroxyl (O-H) | 5 | 5 | 1,0 |
| Protein | 5 | 4 | 1,0 |
| Aromatic ring | 4 | 4 | 1,0 |
| Secondary amine | 4 | 4 | 1,0 |
| Alkene (C=C) | 3 | 3 | 1,0 |
| Water (H2O) | 3 | 3 | 1,0 |
| Methoxy (OCH3) | 3 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| N-O bond | 2 | 2 | 1,0 |
| Protein beta turn | 2 | 1 | 1,0 |
| C-O single bond | 2 | 1 | 1,0 |
| Protein beta sheet | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Nitrate | 1 | 1 | 1,0 |
| Protein random coil | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polyurethane | 1656, 2270, 1700 | Methacrylate, Carbonyl (C=O), Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1656 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Amide Vertrauen 1,0
“A comparison of experimental (in vesicles with 1,2mode responsible for 100% of the intensity of the 1656 band in dipalmitoylphosphatidylcholine) and simulated spectra of the amide I”
Brauner 等 - 2000 - C-13 isotope labeling of hydrophobic peptides. Ori DOI: 10.1021/ja992522o -
Hydroxyl (O-H) Vertrauen 1,0
“The OH stretching band at water.[24] Furthermore, the peaks at change of adsorbed 1656cm(cid:3)1”
Hassan - 2019 - Fourier transform infrared spectroscopy to detect DOI: 10.1080/00387010.2019.1623262 -
Amide Vertrauen 1,0
“For transflection measurements, a peak height at u t cm-1 h 1656 (amide I vibrational mode) was used to segment pixels with an absorbance o greater than 0.015 to ensure that only cells were being counted in the measurement.”
Holton 等 - 2011 - Subcellular localization of early biochemical tran DOI: 10.1039/c1an15112f. -
Protein random coil Vertrauen 1,0
“On the contrary, compared with absorption silka Random coil of 1656 1535 peak of BDO-extended PU, that of Dow BPU decreases in the silka”
Silkinspired polyurethane containing GlyAlaGlyAla tetrapeptide. II. physical properties and structure DOI: 10.1002/app.39185 -
Alkyl C-H Vertrauen 1,0
“cm-1 cm-1, 1656 are vibrating peaks of cis (C=C) and cis (C-H) AND and CDB have spectral similarities at 723”
Martins 等 - 2019 - Approach by Raman and infrared spectroscopy in thr DOI: 10.31349/RevMexFis.65.328 -
N-O bond Vertrauen 1,0
“Middle Eastern collection-PCA of PVAc IR spectra ~1740 As with the PVAc samples, the peak at cm-1 ~1656 PCA was calculated for all 121 PVAc based IR specis most likely due to the NO symmetric”
Identification of cellulose nitrate based adhesive repairs in archaeological pottery of the University of Melbourne’s Middle Eastern archaeological pottery collection using portable FTIR-ATR spectroscopy and PCA DOI: 10.1186/s40494-016-0116-z -
Amide Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Noguchi 等 - 2001 - Triplet formation on a monomeric chlorophyll in th DOI: 10.1021/bi0019848 -
Amide Vertrauen 1,0
“type of characterization, we will ultimately gain a better proteins are represented by the amide I peak only (1656 understanding of the physiological processes in the seed, as well The highest concentrations of protein were observed in the”
Pietrzak 和 Miller - 2005 - Microchemical structure of soybean seeds revealed DOI: 10.1021/jf050608x
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.